市場調查報告書
商品編碼
1423183
油門踏板模組市場報告(按踏板材料(塑膠、金屬)、踏板類型(落地式、懸掛式)、車輛類型(乘用車、商用車)、最終用戶(OEM、售後市場)和地區)2024-2032年Accelerator Pedal Module Market Report by Pedal Material (Plastic, Metal), Pedal Type (Floor Mounted, Suspended), Vehicle Type (Passenger Vehicle, Commercial Vehicle), End-User (OEM, Aftermarket), and Region 2024-2032 |
2023年全球油門踏板模組市場規模達到4.129億個。展望未來, IMARC Group預計到2032年市場規模將達到5.166億個,2024-2032年複合年成長率(CAGR)為2.4%。
加速踏板是加速器的一個組成部分,用於調節進入燃燒室的燃料供應。它們是即裝即用的裝置,由踏板行程感知器以及怠速和滿載停止裝置組成。他們使用感知器來檢測踏板下壓量並將訊號傳輸到引擎控制單元 (ECU)。踏板行程感知器還會記錄加速踏板的運動和位置。 ECU 使用此資訊來計算所需的扭力並對節氣門裝置和噴射系統進行尋址。
這些模組的早期版本大多由金屬製成並覆蓋橡膠,這不僅使它們變得沉重,而且增加了腐蝕的可能性。如今,由於政府為滿足排放標準制定了嚴格的規定,製造商正在專注於開發車輛的輕量化零件。材料開發技術的進步進一步促進了以聚醯胺 6 生產油門踏板,這種材料重量輕且成本效益高。
北美和歐洲等已開發地區集中了全球最大的汽車製造商,擁有更先進的設備、強大的研發能力和現代技術專長。因此,在這些地區,機械油門已完全被電子油門踏板取代。此外,擴大使用基於感測器的加速器預計將成為市場成長的主要促進因素。
隨著亞洲、非洲、中東等地區的快速發展和工業化,汽車工業持續健康發展。這些地區乘用車和商用車製造對汽車油門踏板模組的需求不斷成長,為整個市場的成長提供了積極的推動力。
The global accelerator pedal module market size reached 412.9 Million Units in 2023. Looking forward, IMARC Group expects the market to reach 516.6 Million Units by 2032, exhibiting a growth rate (CAGR) of 2.4% during 2024-2032.
Accelerator pedals are a component of accelerators that are used to regulate the supply of fuel into the combustion chamber. They are ready-to-install units consisting of pedal-travel sensor, and idle and full-load stops. They use sensors to detect the amount of pedal depression and transfer the signal to the engine control unit (ECU). The pedal travel sensor also records the movement and position of the accelerator pedal. The ECU uses this information to calculate the required torque and addresses the throttle device and the injection system.
The earlier versions of these module were mostly made of metal and covered with rubber which not only made them heavy but also increased the possibility of corrosion. Nowadays, manufacturers are focusing on developing lightweight components for vehicles owing to the stringent government rules to meet emission standards. The advancements in material development technology have further led to the production of accelerator pedals from polyamide 6 which is lightweight and cost effective in nature.
The developed regions such as North America and Europe have a concentration of the world's largest automotive manufacturers which have access to more developed equipment, strong R&D capabilities and modern technical expertise. As a result, mechanical accelerators have been completely replaced by electronic accelerator pedals in these regions. Additionaly, the increasing use of sensor-based accelerators is expected to be a major driving factor for the growth of the market.
With the rapid development and industrialization in Asia, Africa and the Middle East, the automotive industry has been experiencing healthy growth. The increasing demand for automotive accelerator pedal modules for the manufacturing of passenger cars and commercial vehicles in these regions is providing a positive thrust to the growth of the overall market.
IMARC Group provides an analysis of the key trends in each sub-segment of the global accelerator pedal module market report, along with forecasts at the global and regional level from 2024-2032. Our report has categorized the market based on pedal material, pedal type, vehicle type and end-user.
Plastic
Metal
Floor Mounted
Suspended
Passenger Vehicle
Commercial Vehicle
OEM
Aftermarket
North America
Europe
Asia Pacific
Middle East and Africa
Latin America
The report has also analysed the competitive landscape of the market with some of the key players being Robert Bosch GmbH, Denso Corporation, ZF Friedrichshafen AG, Hella KGaA Hueck & Co., United Automotive Electronic Systems Co. Ltd., F-TECH Inc., Aisan Industry Co. Ltd., Yorozu Corporation, Pacific Industrial Co. Ltd., Mikuni Corporation, Kyung Chang Industrial Co. Ltd., TT Electronics plc, Alfmeier Praezision SE, AIDA-America, Corp., AKITA KOGYO Co. Ltd., Bellsonica Corporation, Chiyoda Corporation, Chiyoda Kogyo Co., Ltd., Hanya Seisakusho Co. Ltd. and Kuroda Kagaku Co. Ltd.