Product Code: SR112025A7355
The global screw pumps market size reached USD 3.0 Billion in 2024. Looking forward, IMARC Group expects the market to reach USD 4.4 Billion by 2033, exhibiting a growth rate (CAGR) of 4.5% during 2025-2033. The significant growth in the oil and gas industry, various product innovations, and extensive research and development (R&D) activities represent some of the key factors driving the market.
Screw pumps are positive displacement pumps that use rotating screws to move fluids. They consist of various components, such as a casing, screw, seal, motor adapter drive shaft, and bearings. They are manufactured using metal alloys, including cast iron, stainless steel, or bronze. Screw pumps are well-suited to pump high-pressure viscous fluids in offshore and marine installations. They are used in fuel injection, oil burners, and wastewater treatment plants. They are relatively easy to maintain and operate and exhibit versatility with different flow rates, pressures, liquid types and viscosities, and self-priming capabilities. As a result, screw pumps find extensive applications across the oil and gas, power, water treatment, chemicals, and food and beverage (F&B) industries.
Screw Pumps Market Trends:
The significant growth in the oil and gas industry across the globe is one of the key factors creating a positive outlook for the market. Screw pumps are widely used as they provide a continuous flow of fluids for enhanced production. In line with this, the widespread product adoption for applications such as crude oil transfer, pipeline boosting, and drilling mud transfer owing to increasing demand for oil and gas is favoring the market growth. Additionally, the extensive product adoption in refineries to transfer solids from one tank or vessel to another without changing any valves-related configurations is acting as another growth-inducing factor. Apart from this, the introduction of screw pumps manufactured using advanced materials that are more resistant to wear and corrosion, which help to improve the longevity and reliability of screw pumps, is providing an impetus to the market growth. Moreover, the increasing application of screw pumps in wastewater treatment applications to accurately dose chemicals into the wastewater stream and return activated sludge or storm water pumping, which in turn is propelling the market growth. Furthermore, the launch of eccentric screw pumps for shear-sensitive materials that are capable of handling a wide range of viscosities and can provide precise flow control is positively influencing the market growth. Other factors, including increasing demand for energy-efficient pumps, widespread product adoption in the F & B industry, the implementation of various government initiatives to reduce emissions and increase energy efficiency, extensive research and development (R&D) activities, and various product innovations are anticipated to drive the market growth.
Key Market Segmentation:
Screw Configuration Insights:
- Single Screw/Eccentric Screw/Progressive Cavity Pumps
- Twin Screw Pumps
- Three Screw Pumps
- Multiple Screw Pumps
Max. Pressure Insights:
- Up To 16 Bar
- 17-35 Bar
- 36-50 Bar
- 50-80 Bar
- Above 80 Bar
Distribution Channel Insights:
End Use Insights:
- Oil and Gas
- Power
- Water Treatment
- Chemicals
- Food and Beverages
- Others
Regional Insights:
- North America
- United States
- Canada
- Europe
- Germany
- France
- United Kingdom
- Italy
- Spain
- Russia
- Others
- Asia Pacific
- China
- Japan
- India
- South Korea
- Australia
- Indonesia
- Others
- Latin America
- Brazil
- Mexico
- Others
- Middle East and Africa
- The report has also provided a comprehensive analysis of all the major regional markets, which include North America (the United States and Canada); Europe (Germany, France, the United Kingdom, Italy, Spain, Russia and others); Asia Pacific (China, Japan, India, South Korea, Australia, Indonesia, and others); Latin America (Brazil, Mexico, and others); and the Middle East and Africa. According to the report, Asia Pacific was the largest market for screw pumps. Some of the factors driving the Asia Pacific screw pumps market included the significant growth in the oil and gas industry, various product innovations, and extensive research and development (R&D) activities.
Competitive Landscape:
- The report has also provided a comprehensive analysis of the competitive landscape in the global screw pumps market. Detailed profiles of all major companies have also been provided. Some of the companies covered include Alfa Laval AB, CIRCOR International Inc., Desmi A/S, Dover Corporation, Erich Netzsch GmbH & Co. Holding KG, Flowserve Corporation, FLSmidth & Co. A/S, ITT Inc., Iwaki Co. Ltd., KRAL GmbH, Roto Pumps Limited, SPX Flow Inc., etc. Kindly note that this only represents a partial list of companies, and the complete list has been provided in the report.
Key Questions Answered in This Report
- 1. How big is the global screw pumps market?
- 2. What is the expected growth rate of the global screw pumps market during 2025-2033?
- 3. What are the key factors driving the global screw pumps market?
- 4. What has been the impact of COVID-19 on the global screw pumps market?
- 5. What is the breakup of the global screw pumps market based on the screw configuration?
- 6. What is the breakup of the global screw pumps market based on the max. pressure?
- 7. What is the breakup of the global screw pumps market based on the distribution channel?
- 8. What is the breakup of the global screw pumps market based on the end use?
- 9. What are the key regions in the global screw pumps market?
- 10. Who are the key players/companies in the global screw pumps market?
Table of Contents
1 Preface
2 Scope and Methodology
- 2.1 Objectives of the Study
- 2.2 Stakeholders
- 2.3 Data Sources
- 2.3.1 Primary Sources
- 2.3.2 Secondary Sources
- 2.4 Market Estimation
- 2.4.1 Bottom-Up Approach
- 2.4.2 Top-Down Approach
- 2.5 Forecasting Methodology
3 Executive Summary
4 Introduction
- 4.1 Overview
- 4.2 Key Industry Trends
5 Global Screw Pumps Market
- 5.1 Market Overview
- 5.2 Market Performance
- 5.3 Impact of COVID-19
- 5.4 Market Forecast
6 Market Breakup by Screw Configuration
- 6.1 Single Screw/Eccentric Screw/Progressive Cavity Pumps
- 6.1.1 Market Trends
- 6.1.2 Market Forecast
- 6.2 Twin Screw Pumps
- 6.2.1 Market Trends
- 6.2.2 Market Forecast
- 6.3 Three Screw Pumps
- 6.3.1 Market Trends
- 6.3.2 Market Forecast
- 6.4 Multiple Screw Pumps
- 6.4.1 Market Trends
- 6.4.2 Market Forecast
7 Market Breakup by Max. Pressure
- 7.1 Up To 16 Bar
- 7.1.1 Market Trends
- 7.1.2 Market Forecast
- 7.2 17-35 Bar
- 7.2.1 Market Trends
- 7.2.2 Market Forecast
- 7.3 36-50 Bar
- 7.3.1 Market Trends
- 7.3.2 Market Forecast
- 7.4 50-80 Bar
- 7.4.1 Market Trends
- 7.4.2 Market Forecast
- 7.5 Above 80 Bar
- 7.5.1 Market Trends
- 7.5.2 Market Forecast
8 Market Breakup by Distribution Channel
- 8.1 Direct
- 8.1.1 Market Trends
- 8.1.2 Market Forecast
- 8.2 Indirect
- 8.2.1 Market Trends
- 8.2.2 Market Forecast
9 Market Breakup by End Use
- 9.1 Oil and Gas
- 9.1.1 Market Trends
- 9.1.2 Market Forecast
- 9.2 Power
- 9.2.1 Market Trends
- 9.2.2 Market Forecast
- 9.3 Water Treatment
- 9.3.1 Market Trends
- 9.3.2 Market Forecast
- 9.4 Chemicals
- 9.4.1 Market Trends
- 9.4.2 Market Forecast
- 9.5 Food and Beverages
- 9.5.1 Market Trends
- 9.5.2 Market Forecast
- 9.6 Others
- 9.6.1 Market Trends
- 9.6.2 Market Forecast
10 Market Breakup by Region
- 10.1 North America
- 10.1.1 United States
- 10.1.1.1 Market Trends
- 10.1.1.2 Market Forecast
- 10.1.2 Canada
- 10.1.2.1 Market Trends
- 10.1.2.2 Market Forecast
- 10.2 Asia-Pacific
- 10.2.1 China
- 10.2.1.1 Market Trends
- 10.2.1.2 Market Forecast
- 10.2.2 Japan
- 10.2.2.1 Market Trends
- 10.2.2.2 Market Forecast
- 10.2.3 India
- 10.2.3.1 Market Trends
- 10.2.3.2 Market Forecast
- 10.2.4 South Korea
- 10.2.4.1 Market Trends
- 10.2.4.2 Market Forecast
- 10.2.5 Australia
- 10.2.5.1 Market Trends
- 10.2.5.2 Market Forecast
- 10.2.6 Indonesia
- 10.2.6.1 Market Trends
- 10.2.6.2 Market Forecast
- 10.2.7 Others
- 10.2.7.1 Market Trends
- 10.2.7.2 Market Forecast
- 10.3 Europe
- 10.3.1 Germany
- 10.3.1.1 Market Trends
- 10.3.1.2 Market Forecast
- 10.3.2 France
- 10.3.2.1 Market Trends
- 10.3.2.2 Market Forecast
- 10.3.3 United Kingdom
- 10.3.3.1 Market Trends
- 10.3.3.2 Market Forecast
- 10.3.4 Italy
- 10.3.4.1 Market Trends
- 10.3.4.2 Market Forecast
- 10.3.5 Spain
- 10.3.5.1 Market Trends
- 10.3.5.2 Market Forecast
- 10.3.6 Russia
- 10.3.6.1 Market Trends
- 10.3.6.2 Market Forecast
- 10.3.7 Others
- 10.3.7.1 Market Trends
- 10.3.7.2 Market Forecast
- 10.4 Latin America
- 10.4.1 Brazil
- 10.4.1.1 Market Trends
- 10.4.1.2 Market Forecast
- 10.4.2 Mexico
- 10.4.2.1 Market Trends
- 10.4.2.2 Market Forecast
- 10.4.3 Others
- 10.4.3.1 Market Trends
- 10.4.3.2 Market Forecast
- 10.5 Middle East and Africa
- 10.5.1 Market Trends
- 10.5.2 Market Breakup by Country
- 10.5.3 Market Forecast
11 Drivers, Restraints, and Opportunities
- 11.1 Overview
- 11.2 Drivers
- 11.3 Restraints
- 11.4 Opportunities
12 Value Chain Analysis
13 Porters Five Forces Analysis
- 13.1 Overview
- 13.2 Bargaining Power of Buyers
- 13.3 Bargaining Power of Suppliers
- 13.4 Degree of Competition
- 13.5 Threat of New Entrants
- 13.6 Threat of Substitutes
14 Price Analysis
15 Competitive Landscape
- 15.1 Market Structure
- 15.2 Key Players
- 15.3 Profiles of Key Players
- 15.3.1 Alfa Laval AB
- 15.3.1.1 Company Overview
- 15.3.1.2 Product Portfolio
- 15.3.1.3 Financials
- 15.3.1.4 SWOT Analysis
- 15.3.2 CIRCOR International Inc.
- 15.3.2.1 Company Overview
- 15.3.2.2 Product Portfolio
- 15.3.2.3 Financials
- 15.3.2.4 SWOT Analysis
- 15.3.3 Desmi A/S
- 15.3.3.1 Company Overview
- 15.3.3.2 Product Portfolio
- 15.3.4 Dover Corporation
- 15.3.4.1 Company Overview
- 15.3.4.2 Product Portfolio
- 15.3.4.3 Financials
- 15.3.4.4 SWOT Analysis
- 15.3.5 Erich Netzsch GmbH & Co. Holding KG
- 15.3.5.1 Company Overview
- 15.3.5.2 Product Portfolio
- 15.3.6 Flowserve Corporation
- 15.3.6.1 Company Overview
- 15.3.6.2 Product Portfolio
- 15.3.6.3 Financials
- 15.3.6.4 SWOT Analysis
- 15.3.7 FLSmidth & Co. A/S
- 15.3.7.1 Company Overview
- 15.3.7.2 Product Portfolio
- 15.3.7.3 Financials
- 15.3.7.4 SWOT Analysis
- 15.3.8 ITT Inc.
- 15.3.8.1 Company Overview
- 15.3.8.2 Product Portfolio
- 15.3.8.3 Financials
- 15.3.8.4 SWOT Analysis
- 15.3.9 Iwaki Co. Ltd.
- 15.3.9.1 Company Overview
- 15.3.9.2 Product Portfolio
- 15.3.9.3 Financials
- 15.3.10 KRAL GmbH
- 15.3.10.1 Company Overview
- 15.3.10.2 Product Portfolio
- 15.3.11 Roto Pumps Limited
- 15.3.11.1 Company Overview
- 15.3.11.2 Product Portfolio
- 15.3.11.3 Financials
- 15.3.12 SPX Flow Inc.
- 15.3.12.1 Company Overview
- 15.3.12.2 Product Portfolio
- 15.3.12.3 SWOT Analysis
Kindly note that this only represents a partial list of companies, and the complete list has been provided in the report.