查看購物車
  • Simplified Chinese
  • English
  • Japanese
封面
市場調查報告書
商品編碼
1850071

包裝塗料：市場佔有率分析、產業趨勢、統計數據和成長預測（2025-2030 年）

Packaging Coatings - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)
出版日期: | 出版商: Mordor Intelligence | 英文 120 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

預計到 2025 年，包裝塗料市場規模將達到 62.2 億美元，到 2030 年將達到 77.3 億美元，預測期（2025-2030 年）複合年成長率為 4.45%。

成長的促進因素包括全球食品接觸法規的收緊、向不含 PFAS 和無BPA 的化學品的快速轉變，以及消費者對優質和視覺上獨特的包裝日益成長的需求。

包裝塗料市場-IMG1

亞太地區仍是規模最大、成長最快的市場，水性、紫外光固化和不含雙酚A的環氧樹脂技術市場佔有率不斷擴大，加工商競相滿足不斷變化的客戶和監管標準。硬質包裝仍佔據銷售量主導地位，但軟性包裝技術的創新，加上電子商務和輕量化的發展，正在縮小與硬包裝的差距。環氧樹脂原料成本的波動以及循環經濟物流物流的不足，阻礙了包裝塗料市場的穩定發展。

全球包裝塗料市場趨勢與洞察

無BPAA罐內襯強制令推動環氧樹脂替代品的需求

歐盟法規2024/3190將於2025年1月生效，該法規禁止在食品接觸材料中使用雙酚A（BPA）。北美地區也採取了類似的措施，這促使市場對符合規定的罐體內外塗層的需求日益成長。製造商正積極回應，擴大其不含BPA且性能與環氧樹脂相當的樹脂產品線，例如剪切機司的valPure V70和阿克蘇諾貝爾公司的Accelshield 700。填料供應商和品牌所有者在內襯塗料18個月的過渡期之前就對這些系統進行了認證，從而推動了這些產品在兩大洲金屬包裝生產線上的廣泛應用。

亞洲精釀飲品熱潮加速了紫外線固化清漆的普及

印度、中國和東南亞的獨立啤酒生產商正在尋求色彩鮮豔、表面光滑的包裝，以使他們的啤酒罐在琳瑯滿目的貨架上脫穎而出。 UV固化罩光漆具有即時固化、高光澤度和提升生產線效率等優點，推動該技術以約5.01%的複合年成長率成長。 ACTEGA位於馬哈拉斯特拉邦的WESSCO UV工廠展示了擴大本地產能如何支援品牌生產計劃並縮短前置作業時間。

環氧樹脂價格波動對利潤率帶來壓力

供應鏈中斷、能源價格波動和原料短缺已將環氧樹脂成本推至多年來最高的水平。由於環氧樹脂佔據了包裝塗料市場的一半佔有率，即使價格小幅上漲也會擴大製罐商和灌裝商之間的成本轉嫁差距。例如，PPG公司正在加快原料避險和生產效率提升計劃，以減輕對公司利潤的影響。

細分市場分析

到2024年，環氧樹脂體系將佔據包裝塗料市場51%的佔有率，充分展現了其卓越的附著力、耐熱性和化學阻隔性。隨著供應商將符合法規要求和填料性能閾值的無雙酚A（BPA）產品商業化，環氧樹脂相關包裝塗料市場規模預計將以4.7%的複合年成長率成長。宣偉公司的valPure V70和PPG公司的HobaPro 2848便是這種折衷方案的典範，它們既能保持生產線效率，又能消除內分泌干擾物帶來的隱患。

丙烯酸樹脂和聚氨酯樹脂分別適用於對VOC含量要求較低或柔韌性要求較高的應用。聚烯用於熱封鋁箔蓋，而聚酯網路則為沖印飲料罐提供耐溶劑性。生物基樹脂雖然仍處於小眾市場，但隨著品牌商測試纖維素、萜烯和多醣體基質在零食包裝和一次性杯子材料方面的應用，其市場正經歷兩位數的成長。

抑制情境中所描述的環氧樹脂價格波動促使採購經理們隨時注意替代機會。然而，終端用戶很少會完全放棄這類產品，因為生產線改造需要停機和重新測試。因此，混合策略應運而生：使用薄層環氧底漆搭配丙烯酸或聚酯面漆，既能降低雙酚的整體暴露量，又能保持其核心優勢。在整個預測期內，預計透過漸進式改進而非徹底替換，環氧樹脂將繼續保持其主導地位，同時避免違反日益嚴格的遷移限制。

到2024年，水性產品將佔銷售額的43%，因為加工商追求更低的VOC含量和更簡化的授權流程。隨著歐洲PFAS政策獎勵水性阻隔技術的發展，水性包裝塗料的市場規模預計將穩定成長。薄膜穩定性的進步，例如PUD#65215A，縮短了乾燥曲線，並可製備更厚的薄膜，從而縮小了與溶劑型塗料相比以往的生產效率差距。

紫外光固化技術以5.01%的複合年成長率位居榜首，這主要得益於其即時固化的經濟性和對烘箱基礎設施的極簡要求。亞太地區的移動罐裝生產線採用了紫外光局部清漆裝置，為精釀啤酒生產商提供小批量貼標服務，凸顯了該平台的通用性。溶劑型硝化纖維素或環氧樹脂系統仍然是高溫蒸餾食品的主要塗料，這類食品需要極強的耐化學腐蝕性，但加州和歐盟持續實施的空氣品質法規限制了其進一步成長。粉末塗料雖然市佔率較小，但憑藉零揮發性有機化合物（VOC）和優異的邊緣覆蓋率，正在焊接氣霧罐領域不斷擴大市場佔有率，進一步強化了綠色化學理念，而這正是包裝塗料市場競爭格局的關鍵所在。

技術選擇日益多元化，需要在固化速度、能耗、遷移限制、氣味、可回收性和總應用成本之間取得平衡。配方師們正在整合人工智慧驅動的實驗設計，以最佳化成分基質，從而減少實驗室排放並加快產品上市速度。由此催生了一系列混合化學技術——水性紫外線固化塗料、能量固化粉末塗料和高固態聚酯塗料——這些技術模糊了技術邊界，並將整個包裝塗料市場推向具有生命週期優勢的平台。

區域分析

亞太地區以43%的市佔率領先包裝塗料市場，預計到2024年將以4.73%的複合年成長率持續成長。中國飲料罐生產的蓬勃發展、印度精釀啤酒的興起以及東南亞零食出口的蓬勃成長，共同推動了該地區無與倫比的銷售成長。區域政府也正在加速推動低VOC（揮發性有機化合物）排放標準，鼓勵國內企業引進西方水性塗料技術，同時投資建置本地UV樹脂配製能力。像安姆科這樣的跨國公司正在擴大其醫療包裝工廠，以開拓快速成長的醫療保健細分市場，進一步鞏固了亞太地區的市場地位。

北美位居第二，這主要得益於其人均飲料消費量高以及對柔觸啞光清漆等高階表面處理的廣泛應用。 FDA 與歐盟 PFAS 法規的接軌將加快標籤更新週期，並增加對合規替代方案的需求。除了罐頭食品外，北美電子商務的普及也將推動對抗衝擊包裝袋和防刮封口的需求，從而擴大包裝塗料市場的地理範圍。

在歐洲，監管變革而非銷售激增將成為成長的主要驅動力。將於2025年1月生效的雙酚A（BPA）禁令以及即將實施的全氟烷基和多氟烷基物質（PFAS）禁令正在推動技術快速轉型，阿克蘇諾貝爾投資3200萬歐元的西班牙工廠就是一個例證，該工廠計劃於2025年中期運作。儘管受經濟低迷影響，銷量成長有所放緩，但每噸技術附加價值有所提升，部分抵消了罐體銷量成長放緩的影響。同時，中東和非洲將受益於可支配收入的成長以及海灣合作理事會（GCC）倉儲基礎設施的完善，而南美洲將繼續為塗料出口商提供選擇性的成長空間，飲料業在經濟波動中正在復甦。

其他福利：

  • Excel格式的市場預測（ME）表
  • 3個月的分析師支持

目錄

第1章 引言

  • 研究假設和市場定義
  • 調查範圍

第2章調查方法

第3章執行摘要

第4章 市場情勢

  • 市場概覽
  • 市場促進因素
    • 北美和歐洲強制要求使用無BPAA的罐內襯，推動了對環氧樹脂替代品的需求。
    • 亞洲精釀飲品熱潮加速了紫外線固化清漆的普及
    • 耐刮瓶蓋和封口塗層推動了海灣合作理事會地區生鮮電商的成長。
    • 歐洲逐步淘汰 PFAS 推動紙板水性阻隔塗料的發展
    • 擴大氣霧罐包裝塗層在個人護理行業的應用
  • 市場限制
    • 環氧樹脂價格的波動給全部區域的利潤率帶來了壓力。
    • 回收利用流程薄弱，生物屏障的引入進展緩慢。
    • 關於揮發性有機化合物排放的嚴格法規和環境問題
  • 價值鏈分析
  • 波特五力模型
    • 供應商的議價能力
    • 買方的議價能力
    • 新進入者的威脅
    • 替代品的威脅
    • 競爭對手之間的競爭

第5章 市場規模與成長預測

  • 樹脂
    • 環氧樹脂
    • 丙烯酸纖維
    • 聚氨酯
    • 聚烯
    • 聚酯纖維
    • 其他樹脂
  • 透過塗層技術
    • 水溶液
    • 溶劑型
    • 粉末
    • 紫外線固化
  • 按包裝類型
    • 硬質（罐、瓶蓋、封口）
    • 軟性包裝（袋裝、薄膜包裝、小袋）
  • 透過使用
    • 罐頭食品
    • 飲料罐
    • 氣霧劑和管
    • 瓶蓋和封口
    • 工業和特殊包裝
  • 按最終用戶行業分類
    • 食品/飲料
    • 個人護理和化妝品
    • 醫療保健和製藥
    • 工業產品
  • 按地區
    • 亞太地區
      • 中國
      • 印度
      • 日本
      • 韓國
      • 印尼
      • 馬來西亞
      • 泰國
      • 越南
      • 亞太其他地區
    • 北美洲
      • 美國
      • 加拿大
      • 墨西哥
    • 歐洲
      • 德國
      • 英國
      • 法國
      • 義大利
      • 西班牙
      • 北歐國家
      • 土耳其
      • 俄羅斯
      • 其他歐洲地區
    • 南美洲
      • 巴西
      • 阿根廷
      • 哥倫比亞
      • 其他南美洲
    • 中東和非洲
      • 卡達
      • 阿拉伯聯合大公國
      • 奈及利亞
      • 埃及
      • 南非
      • 其他中東和非洲地區

第6章 競爭情勢

  • 市場集中度
  • 策略趨勢
  • 市佔率分析
  • 公司簡介
    • Akzo Nobel NV
    • ALTANA
    • artience Co., Ltd.
    • Axalta Coating Systems LLC
    • BASF SE
    • DIC Corporation
    • Dow
    • HB Fuller Company
    • Hempel A/S
    • Henkel AG & Co. KGaA
    • Jamestown Coating Technologies
    • Jotun
    • KANGNAM JEVISCO CO., LTD.
    • Kansai Paint Co., Ltd.
    • Michelman, Inc.
    • PPG Industries Inc.
    • RPM International Inc.
    • Silgan Holdings Inc.
    • The Sherwin-Williams Company

第7章 市場機會與未來展望

簡介目錄
Product Code: 52777

The Packaging Coatings Market size is estimated at USD 6.22 billion in 2025, and is expected to reach USD 7.73 billion by 2030, at a CAGR of 4.45% during the forecast period (2025-2030).Growth is being propelled by tighter global food-contact rules, rapid shifts toward PFAS-free and BPA-free chemistries, and rising consumer demand for premium, visually distinctive packages.

Packaging Coatings - Market - IMG1

Asia-Pacific remains both the largest and fastest-expanding region, while water-based, UV-curable, and non-BPA epoxy technologies capture share as converters race to meet evolving customer and legislative standards. Rigid formats continue to dominate volumes, yet flexible innovations tied to e-commerce and lightweighting are eroding the historical gap. Cost volatility for epoxy feedstocks and infrastructure gaps in circular-economy logistics temper the otherwise steady advance of the packaging coatings market.

Global Packaging Coatings Market Trends and Insights

BPA-free Can-Lining Mandates Fueling Epoxy-Alternative Demand

The EU Regulation 2024/3190 banning bisphenol A in food-contact materials, effective January 2025, coupled with parallel North-American measures, has created an acute need for compliant internal and external can coatings. Manufacturers are responding by scaling non-BPA chemistries that retain epoxy performance, such as Sherwin-Williams' valPure V70 and Akzo Nobel's Accelshield 700. Fillers and brand owners are qualifying these systems well ahead of the 18-month transition window granted for internal linings, driving brisk adoption across metal packaging lines in both continents.

Craft Beverage Boom in Asia Accelerating UV-Curable Varnish Uptake

Independent breweries across India, China, and Southeast Asia seek vibrant graphics and scratch-free finishes that differentiate cans on crowded shelves. UV-curable overprint varnishes deliver instant cure, high gloss, and line-speed productivity benefits, pushing their technology CAGR around 5.01%. ACTEGA's new WESSCO UV facility in Maharashtra illustrates how local capacity expansion supports brand schedules while reducing lead times.

Epoxy Resin Price Volatility Pressuring Margins

Supply-chain disruptions, energy price swings, and feedstock tightness have pushed epoxy costs to multi-year highs. Because epoxies underpin half of the packaging coatings market, even minor price spikes widen cost-pass-through gaps for can-makers and fillers. PPG, for example, has accelerated raw-material hedging and productivity programs to soften earnings exposure.

Other drivers and restraints analyzed in the detailed report include:

  1. GCC E-Grocery Growth Boosting Scuff-Resistant Cap & Closure Coatings
  2. Europe PFAS Phase-Out Driving Water-Based Barrier Coatings for Paperboard
  3. Weak Recycling Streams Slowing Bio-Barrier Adoption

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Epoxy systems accounted for 51% of packaging coatings market share in 2024, underlining their unrivaled adhesion, heat resistance and chemical barrier attributes. The packaging coatings market size tied to epoxies is set to grow on a 4.7% CAGR as suppliers commercialize non-BPA variants that satisfy both regulatory scrutiny and filler performance thresholds. Sherwin-Williams' valPure V70 and PPG's HobaPro 2848 exemplify this middle-path approach, preserving line efficiency while eliminating endocrine-disruptor concerns.

Acrylic and polyurethane chemistries now capture applications requiring lower VOC profiles or higher flexibility, respectively. Polyolefins serve heat-seal foil lids, whereas polyester networks bring solvent resistance to D&I beverage cans. Bio-derived resins, although still niche, post double-digit gains as brand owners test cellulose, terpene and polysaccharide matrices for snack flexibles and single-use cup stock.

Epoxy price swings described in the restraints scenario keep purchasing managers alert to substitution opportunities; nonetheless, end-users rarely abandon the class outright because retrofitting lines entails downtime and retesting. Consequently, hybrid strategies emerge: thin epoxy primers topped with acrylic or polyester overcoats reduce overall bisphenol exposure while retaining core advantages. Over the forecast window, incremental reformulation rather than wholesale replacement is expected to preserve epoxy primacy without breaching tightening migration limits.

Water-based products held 43% revenue in 2024 as converters chased lower VOCs and simpler permitting. The packaging coatings market size for water-based lines is forecast to rise steadily, helped by European PFAS policies that incentivize aqueous barrier science. Film stability advances such as PUD #65215A shorten drying curves and allow thicker films, narrowing historical productivity gaps versus solvent routes.

UV-curable technology registers the highest 5.01% CAGR thanks to instant-cure economics and minimal oven infrastructure. Asia-Pacific mobile canning lines now adopt UV spot-varnish units to enable short-run labels for craft brewers, highlighting the versatility of the platform. Solvent-borne nitrocellulose or epoxy systems still dominate retort foods needing extreme chemical resistance, but ongoing air-quality caps in California and the EU limit incremental growth. Powder coatings, although a smaller base, earn share in welded aerosol cans by offering zero VOCs and superb edge coverage, reinforcing the green-chemistry narrative that underscores competition within the packaging coatings market.

Technology selection is increasingly multivariate-balancing cure speed, energy, migration limits, odor, recyclability and total applied cost. Formulators now integrate AI-guided design of experiments to optimize ingredient matrices, accelerating time-to-market while cutting lab emissions. The resulting pipeline of hybrid chemistries-water-based UV, energy-curable powders and high-solid polyesters-suggests that technology lines will blur, yet the overall packaging coatings market will pivot toward platforms with verifiable life-cycle advantages.

The Packaging Coatings Market Report Segments the Industry by Resin (Epoxies, Acrylics, and More), Coating Technology (Water-Based, Solvent-Based, and More), Packaging Type (Rigid and Flexible), Application (Food Cans, Beverage Cans, and More), End-User Industry (Food and Beverage, Industrial Goods, and More), and Geography (Asia-Pacific, North America, Europe, South America, and Middle East and Africa).

Geography Analysis

Asia-Pacific led the packaging coatings market with a 43% revenue share in 2024 and the highest 4.73% CAGR outlook. China's beverage can production, India's craft-beer rise and Southeast Asia's snack export boom combine to deliver unrivaled volume growth. Regional authorities also fast-track low-VOC mandates, pushing domestic firms to license Western water-borne know-how while investing in local UV resin synthesis capacity. Multinationals such as Amcor are expanding medical-pack plants to tap the fastest-growing healthcare sub-segment, reinforcing Asia-Pacific's centrality.

North America ranks second, buoyed by high per-capita beverage consumption and widespread adoption of premium finishes such as matte-varnish soft-touch. The FDA's alignment with EU PFAS restrictions accelerates label-change cycles, driving incremental demand for compliant alternatives. Beyond canning, North American e-commerce penetration lifts the need for impact-resistant pouches and scuff-proof lids, extending the regional scope of the packaging coatings market.

Europe experiences regulatory-induced transformation rather than volume surge. The BPA ban effective January 2025 and looming PFAS prohibition are compelling rapid technology swaps, evident in Akzo Nobel's EUR 32 million Spanish plant scheduled for mid-2025 start-up. Although economic sluggishness tempers unit volume growth, technology value-add per ton rises, partially offsetting slower can counts. Meanwhile, the Middle East and Africa benefit from rising disposable incomes and GCC warehousing infrastructure, while South America sees beverage-sector resilience amid economic swings, continuing to offer selective upside for coating exporters.

  1. Akzo Nobel N.V.
  2. ALTANA
  3. artience Co., Ltd.
  4. Axalta Coating Systems LLC
  5. BASF SE
  6. DIC Corporation
  7. Dow
  8. H.B. Fuller Company
  9. Hempel A/S
  10. Henkel AG & Co. KGaA
  11. Jamestown Coating Technologies
  12. Jotun
  13. KANGNAM JEVISCO CO., LTD.
  14. Kansai Paint Co., Ltd.
  15. Michelman, Inc.
  16. PPG Industries Inc.
  17. RPM International Inc.
  18. Silgan Holdings Inc.
  19. The Sherwin-Williams Company

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 BPA-free Can Lining Mandates Fueling Epoxy-Alternative Demand in North America and Europe
    • 4.2.2 Craft Beverage Boom in Asia Accelerating UV-Curable Varnish Uptake
    • 4.2.3 GCC E-grocery Growth Boosting Scuff-Resistant Cap and Closure Coatings
    • 4.2.4 Europe PFAS Phase-out Driving Water-based Barrier Coatings for Paperboard
    • 4.2.5 Growing Utilization of Packaging Coatings in Aerosol Cans for Personal Care Industry
  • 4.3 Market Restraints
    • 4.3.1 Epoxy Resin Price Volatility Pressuring Margins Across Regions
    • 4.3.2 Weak Recycling Streams Slowing Bio-barrier Adoption
    • 4.3.3 Stringent Regulation and Environmental Concern Regarding VOC Emission
  • 4.4 Value Chain Analysis
  • 4.5 Porter's Five Forces
    • 4.5.1 Bargaining Power of Suppliers
    • 4.5.2 Bargaining Power of Buyers
    • 4.5.3 Threat of New Entrants
    • 4.5.4 Threat of Substitutes
    • 4.5.5 Competitive Rivalry

5 Market Size and Growth Forecasts (Value)

  • 5.1 By Resin
    • 5.1.1 Epoxies
    • 5.1.2 Acrylics
    • 5.1.3 Polyurethane
    • 5.1.4 Polyolefins
    • 5.1.5 Polyester
    • 5.1.6 Other Resins
  • 5.2 By Coating Technology
    • 5.2.1 Water-based
    • 5.2.2 Solvent-based
    • 5.2.3 Powder
    • 5.2.4 UVcurable
  • 5.3 By Packaging Type
    • 5.3.1 Rigid (Cans, Caps and Closures)
    • 5.3.2 Flexible (Pouches, Films, Sachets)
  • 5.4 By Application
    • 5.4.1 Food Cans
    • 5.4.2 Beverage Cans
    • 5.4.3 Aerosol and Tubes
    • 5.4.4 Caps and Closures
    • 5.4.5 Industrial and Specialty Packaging
  • 5.5 By End-User Industry
    • 5.5.1 Food and Beverage
    • 5.5.2 Personal Care and Cosmetics
    • 5.5.3 Healthcare and Pharmaceutical
    • 5.5.4 Industrial Goods
  • 5.6 By Geography
    • 5.6.1 Asia-Pacific
      • 5.6.1.1 China
      • 5.6.1.2 India
      • 5.6.1.3 Japan
      • 5.6.1.4 South Korea
      • 5.6.1.5 Indonesia
      • 5.6.1.6 Malaysia
      • 5.6.1.7 Thailand
      • 5.6.1.8 Vietnam
      • 5.6.1.9 Rest of Asia-Pacific
    • 5.6.2 North America
      • 5.6.2.1 United States
      • 5.6.2.2 Canada
      • 5.6.2.3 Mexico
    • 5.6.3 Europe
      • 5.6.3.1 Germany
      • 5.6.3.2 United Kingdom
      • 5.6.3.3 France
      • 5.6.3.4 Italy
      • 5.6.3.5 Spain
      • 5.6.3.6 Nordics
      • 5.6.3.7 Turkey
      • 5.6.3.8 Russia
      • 5.6.3.9 Rest of Europe
    • 5.6.4 South America
      • 5.6.4.1 Brazil
      • 5.6.4.2 Argentina
      • 5.6.4.3 Colombia
      • 5.6.4.4 Rest of South America
    • 5.6.5 Middle East and Africa
      • 5.6.5.1 Qatar
      • 5.6.5.2 United Arab Emirates
      • 5.6.5.3 Nigeria
      • 5.6.5.4 Egypt
      • 5.6.5.5 South Africa
      • 5.6.5.6 Rest of Middle East and Africa

6 Competitive Landscape

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share Analysis
  • 6.4 Company Profiles {(includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products and Services, and Recent Developments)}
    • 6.4.1 Akzo Nobel N.V.
    • 6.4.2 ALTANA
    • 6.4.3 artience Co., Ltd.
    • 6.4.4 Axalta Coating Systems LLC
    • 6.4.5 BASF SE
    • 6.4.6 DIC Corporation
    • 6.4.7 Dow
    • 6.4.8 H.B. Fuller Company
    • 6.4.9 Hempel A/S
    • 6.4.10 Henkel AG & Co. KGaA
    • 6.4.11 Jamestown Coating Technologies
    • 6.4.12 Jotun
    • 6.4.13 KANGNAM JEVISCO CO., LTD.
    • 6.4.14 Kansai Paint Co., Ltd.
    • 6.4.15 Michelman, Inc.
    • 6.4.16 PPG Industries Inc.
    • 6.4.17 RPM International Inc.
    • 6.4.18 Silgan Holdings Inc.
    • 6.4.19 The Sherwin-Williams Company

7 Market Opportunities and Future Outlook

  • 7.1 White-space and Unmet-Need Assessment
  • 7.2 Growing Inclination for Eco-Friendly Packaging Coatings