查看購物車
  • Simplified Chinese
  • English
  • Japanese
封面
市場調查報告書
商品編碼
1687175

三元乙丙橡膠(EPDM)：市場佔有率分析、產業趨勢與統計、成長預測（2025-2030 年）

Ethylene Propylene Diene Monomer (EPDM) - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)
出版日期: | 出版商: Mordor Intelligence | 英文 150 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

預計 2025 年三元乙丙橡膠(EPDM) 市場規模為 191 萬噸，到 2030 年將達到 233 萬噸，預測期內（2025-2030 年）的複合年成長率將超過 4%。

乙烯丙烯二烯單體 (EPDM)-市場-IMG1

2020 年，新冠疫情對市場產生了負面影響。不過，目前估計市場已恢復到疫情前的水準。

主要亮點

  • 從中期來看，建設產業的需求增加和電動車市場的成長是市場成長的主要驅動力。
  • 由於 EPDM 使用石油衍生原料，油價波動可能會抑制市場成長。
  • 生物基 EPDM 的出現可以為所研究的市場帶來機會。
  • 亞太地區佔據市場主導地位，預計在預測期內將繼續佔據主導地位。

三元乙丙橡膠(EPDM) 市場趨勢

汽車領域佔據市場主導地位

  • 三元乙丙橡膠橡膠（EPDM）是丙烯、乙烯和少量非共軛二烯單體的共聚物。它在汽車工業中有著廣泛的應用，包括擋風雨條、玻璃和窗戶密封系統、軟管、管材、輪胎和皮帶。
  • 擋風雨條或密封條是一種密封任何開口的系統。它們是軟性的或半剛性的，可以吸收車輛運動引起的振動。
  • 擋風雨條用於透過轉移或返回水來部分或完全防止來自外部的水或雨的滲入。它還可以防止空氣從車內流向車外。這有助於節省暖氣、通風和空調 (HVAC) 的能源。
  • 汽車上的每個車門至少需要 20 英尺的材料，每個窗戶至少需要 10 英尺的材料。根據汽車的大小，汽車後車箱也需要大量的材料。這表明汽車對用於擋風雨條和密封應用的橡膠的需求。
  • EPDM 的耐磨性、耐切割性、抗撕裂性和抗張強度使其成為大多數應用的首選。 EPDM橡膠用於幾乎所有機動車輛的密封條和密封應用，包括乘用車、輕型商用車、巴士、長途客車和重型卡車，其中輕型商用車佔密封條和密封應用的大部分。
  • 根據OICA的數據，2021年全球整體汽車銷售（所有類型）為8,268萬輛，總產量為8,014萬輛。
  • 2021年美國汽車產量為156萬輛，商用車產量為760萬輛，成長4%。
  • 因此，鑑於上述情況，預計汽車產業將佔據市場主導地位。

亞太地區佔市場主導地位

  • 亞太地區佔據市場主導地位，並且很可能在預測期內繼續佔據主導地位。亞太地區是全球汽車和建築業的中心，也是推動 EPDM 需求的主要地區。
  • 中國是世界上最大的汽車製造業國家。 2021年商用車及汽車產量成長3%至2608萬輛。
  • 中國消費性電子產品收益預計將以每年2.04%的速度成長，到2025年市場規模將達到1,756.7億美元。
  • 建築業是印度第二大產業，對GDP的貢獻率約9%。預計預測期結束時印度建築業價值將達到近 1 兆美元，成為全球第三大市場。
  • 日本的電氣電子產業是世界領先的產業之一。 2021年，受電子零件及設備出口強勁，以及生活方式改變帶動通訊基礎設施設備成長的推動，日本電子產業國內產值與前一年同期比較增11%，達到10.9322兆日圓（約997.5億美元）。
  • 預計所有上述因素都將在預測期內對市場產生重大影響。

三元乙丙橡膠(EPDM) 產業概覽

三元乙丙橡膠(EPDM) 市場趨於整合，五大主要企業佔相當大的佔有率。主要企業（不分先後順序）包括陶氏化學、阿朗新科、埃克森美孚、Versalis SpA 和錦湖 POLYCHEMM。

其他福利：

  • Excel 格式的市場預測 (ME) 表
  • 3 個月的分析師支持

目錄

第 1 章 簡介

  • 調查前提條件
  • 研究範圍

第2章調查方法

第3章執行摘要

第4章 市場動態

  • 驅動程式
    • 建設產業需求不斷成長
    • 電動車市場正在成長
  • 限制因素
    • 原油價格波動
    • 其他限制因素
  • 產業價值鏈分析
  • 波特五力模型
    • 供應商的議價能力
    • 消費者議價能力
    • 新進入者的威脅
    • 替代品的威脅
    • 競爭程度

第5章 市場區隔

  • 製造過程
    • 溶液聚合工藝
    • 泥漿/懸浮液工藝
    • 氣相聚合工藝
  • 應用
    • 車
    • 建築和施工
    • 製造業
    • 電氣和電子
    • 其他用途
  • 地區
    • 亞太地區
      • 中國
      • 印度
      • 日本
      • 韓國
      • 其他亞太地區
    • 北美洲
      • 美國
      • 加拿大
      • 墨西哥
    • 歐洲
      • 德國
      • 英國
      • 法國
      • 義大利
      • 其他歐洲國家
    • 南美洲
      • 巴西
      • 阿根廷
      • 南美洲其他地區
    • 中東和非洲
      • 沙烏地阿拉伯
      • 南非
      • 其他中東和非洲地區

第6章 競爭格局

  • 併購、合資、合作、協議
  • 市場佔有率（%）分析
  • 主要企業策略
  • 公司簡介
    • ARLANXEO
    • Dow
    • Elevate
    • Exxon Mobil Corporation.
    • ENEOS Materials Corporation
    • Jilin Xingyun Chemical Co.,Ltd.
    • Johns Manville
    • KUMHO POLYCHEM
    • Lion Elastomers
    • Mitsui Chemicals, Inc.
    • PetroChina Company Limited
    • SK Global Co., Ltd.
    • Versalis SpA

第7章 市場機會與未來趨勢

  • 生物基 EPDM 的出現
簡介目錄
Product Code: 56012

The Ethylene Propylene Diene Monomer Market size is estimated at 1.91 million tons in 2025, and is expected to reach 2.33 million tons by 2030, at a CAGR of greater than 4% during the forecast period (2025-2030).

Ethylene Propylene Diene Monomer (EPDM) - Market - IMG1

The COVID-19 pandemic had a negative impact on the market in 2020. However, the market has now been estimated to have reached pre-pandemic levels.

Key Highlights

  • Over the medium term, the major factor driving the growth of the market studied is the growing demand from the construction industry and the growth in the electric vehicles market.
  • Since EPDM is derived from petroleum-based raw materials, the fluctuations in oil prices can restrain the market studied.
  • The emergence of bio-based EPDM can be seen as an opportunity for the market studied.
  • Asia-Pacific dominated the market and is expected to continue its dominance during the forecast period.

Ethylene Propylene Diene Monomer Market Trends

Automotive Segment to Dominate the Market

  • Ethylene propylene diene monomer (EPDM) rubber is a copolymer of propylene, ethylene, and a small amount of non-conjugated diene monomers used in the automotive industry for various applications as weatherstripping, sealing systems for glass and windows, hose, and tubing, tires, and belts amongst others.
  • Weatherstripping or weather seals is a system that seals any openings. They are flexible or semi-rigid and can take vibrations caused by vehicle movement.
  • Weatherstripping is used to prevent the entry of water and rain partially or completely into the automobile from outside by either rerouting or returning the water. Also, it prevents the movement of air from the automotive interior to the outside and vice versa. This helps in saving energy on heating, ventilation, and air conditioning (HVAC).
  • Each door in the automobile will need at least 20 feet of material, and every window requires a minimum of 10 feet of material. The trunk of the automobile may also require much larger amounts of material depending on the size of the automobile. It indicates the demand for rubber in the automobile for weather stripping and sealing applications.
  • EPDM's resistance to abrasion, cutting, tearing, and tensile strength, EPDM is preferred in most applications. EPDM rubber is used for weather strip and sealing applications in almost all automobiles, such as passenger cars, lightweight commercial vehicles, busses, coaches, and heavy trucks, of which light commercial vehicles dominate the weather strip and sealing application.
  • Globally, according to OICA, the sales of vehicles (all types) in the year 2021 were 82.68 million units, and the total production was 80.14 million units.
  • The total production of cars in the United States in 2021 was 1.56 million units, and that of commercial vehicles was 7.60 million units registering an increase of 4%.
  • Hence, owing to the above-mentioned aspects, the automotive segment is expected to dominate the market.

Asia-Pacific Region to Dominate the Market

  • Asia-Pacific dominated the market with a share and is likely to continue its dominance during the forecast period. Asia-Pacific is a hub for automotive and construction industries globally and is the major region driving the demand for EPDM.
  • The Chinese automotive manufacturing industry is the largest in the world. The country observed a growth of 3% in the production of commercial vehicles and cars in the year 2021, with a total production of 26.08 million vehicles.
  • China's revenue from consumer electronics is expected to show an annual growth rate of 2.04%, resulting in a projected market volume of USD 175,670 million by 2025.
  • The construction industry is the second-largest industry in India, with a GDP contribution of about 9%. It is predicted that the Indian construction industry is expected to emerge as the third-largest market in the world, with a size of almost USD 1 trillion by the end of the forecast period.
  • The Japanese electrical and electronics industry is one of the world's leading industries. In 2021, domestic production by the Japanese electronics industry surged by 11% year-on-year to JPY 10,932.2 billion (~ USD 99.75 billion) due to the strong export performance of electronic components and devices and the growth in telecommunications infrastructure equipment due to lifestyle changes.
  • All the aforementioned factors, in turn, are projected to have a significant impact on the market during the forecast period.

Ethylene Propylene Diene Monomer Industry Overview

The ethylene propylene diene monomer (EPDM) market is consolidated, with the top five players accounting for a significant share. The key players (not in any particular order) include Dow, ARLANXEO., Exxon Mobil Corporation., Versalis S.p.A, and KUMHO POLYCHEM.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS

  • 4.1 Drivers
    • 4.1.1 Growing Demand from the Construction Industry
    • 4.1.2 Growth in the Electric Vehicles Market
  • 4.2 Restraints
    • 4.2.1 Fluctuations in the Oil Prices
    • 4.2.2 Other Restraints
  • 4.3 Industry Value Chain Analysis
  • 4.4 Porter Five Forces
    • 4.4.1 Bargaining Power of Suppliers
    • 4.4.2 Bargaining Power of Consumers
    • 4.4.3 Threat of New Entrants
    • 4.4.4 Threat of Substitute Products and Services
    • 4.4.5 Degree of Competition

5 MARKET SEGMENTATION (Market Size in Value)

  • 5.1 Manufacturing Process
    • 5.1.1 Solution Polymerization Process
    • 5.1.2 Slurry/Suspension Process
    • 5.1.3 Gas-phase Polymerization Process
  • 5.2 Application
    • 5.2.1 Automotive
    • 5.2.2 Building and Construction
    • 5.2.3 Manufacturing
    • 5.2.4 Electrical and Electronics
    • 5.2.5 Other Applications
  • 5.3 Geography
    • 5.3.1 Asia-Pacific
      • 5.3.1.1 China
      • 5.3.1.2 India
      • 5.3.1.3 Japan
      • 5.3.1.4 South Korea
      • 5.3.1.5 Rest of Asia-Pacific
    • 5.3.2 North America
      • 5.3.2.1 United States
      • 5.3.2.2 Canada
      • 5.3.2.3 Mexico
    • 5.3.3 Europe
      • 5.3.3.1 Germany
      • 5.3.3.2 United Kingdom
      • 5.3.3.3 France
      • 5.3.3.4 Italy
      • 5.3.3.5 Rest of Europe
    • 5.3.4 South America
      • 5.3.4.1 Brazil
      • 5.3.4.2 Argentina
      • 5.3.4.3 Rest of South America
    • 5.3.5 Middle-East and Africa
      • 5.3.5.1 Saudi Arabia
      • 5.3.5.2 South Africa
      • 5.3.5.3 Rest of Middle-East and Africa

6 COMPETITIVE LANDSCAPE

  • 6.1 Mergers and Acquisitions, Joint Ventures, Collaborations, and Agreements
  • 6.2 Market Share (%) Analysis
  • 6.3 Strategies Adopted by Leading Players
  • 6.4 Company Profiles
    • 6.4.1 ARLANXEO
    • 6.4.2 Dow
    • 6.4.3 Elevate
    • 6.4.4 Exxon Mobil Corporation.
    • 6.4.5 ENEOS Materials Corporation
    • 6.4.6 Jilin Xingyun Chemical Co.,Ltd.
    • 6.4.7 Johns Manville
    • 6.4.8 KUMHO POLYCHEM
    • 6.4.9 Lion Elastomers
    • 6.4.10 Mitsui Chemicals, Inc.
    • 6.4.11 PetroChina Company Limited
    • 6.4.12 SK Global Co., Ltd.
    • 6.4.13 Versalis S.p.A

7 MARKET OPPORTUNITIES AND FUTURE TRENDS

  • 7.1 Emergence of Bio-based EPDM