市場調查報告書
商品編碼
1462702
汽車主動懸吊系統市場至2030年的預測:依產品類型、系統、零件、車型、銷售管道和地區的全球分析Automotive Active Suspension System Market Forecasts to 2030 - Global Analysis By Product Type, System, Component, Vehicle Type, Sales Channel and By Geography |
根據 Stratistics MRC 的資料,2023年全球汽車主動懸吊系統市場規模將達到 473 億美元,預計到2030年將達到 649 億美元,預測期內年複合成長率為 4.6%。
汽車主動懸吊系統使用感測器來監測車輛動態和路況,並即時調整各個車輪的運動,以最佳化乘坐舒適性、穩定性和操控性。它使用液壓和電磁致動器主動控制減震器和彈簧等懸吊零件。透過不斷適應不斷變化的路面和駕駛條件,主動懸吊可增強車輛性能,減少車身側傾,提高牽引力,並最大限度地減少振動和聲振粗糙度。該技術改善了整體駕駛體驗,提供平穩的駕駛體驗和增強的控制力,同時透過減輕不平坦地形和突然操縱的影響來提高安全性。
對舒適性和安全性的要求不斷提高
隨著消費者優先考慮更平穩的乘坐和更多的安全功能,汽車製造商引進先進的懸吊系統。主動懸吊系統根據路況和駕駛因素輸入動態調整車輛懸吊,與被動系統相比,提供卓越的舒適性、穩定性和安全性。人們對這些好處的認知不斷提高,推動了主動懸吊系統的採用,特別是在豪華和高性能汽車領域。汽車製造商努力滿足消費者對舒適性和安全性的期望,這一趨勢預計將繼續推動市場成長。
主動懸吊系統為汽車帶來了複雜性
雖然這些系統提供了卓越的乘坐和操控性能,但它們的整合使車輛設計、製造和維護變得複雜。這種複雜性可能會導致更高的生產成本、增加的重量以及潛在的可靠性問題,阻止一些汽車製造商採用主動懸吊技術。此外,維護和維修需要專業知識和設備,這會增加擁有成本。因此,複雜性問題可能會阻礙主動懸吊系統的普及和市場滲透。
電動和自動駕駛汽車的成長趨勢
電動和自動駕駛汽車推動對先進懸吊系統的需求,因為它們優先考慮效率、舒適性和安全性。主動懸吊系統在最佳化乘坐舒適性、穩定性和操控性方面發揮關鍵作用,改善電動和自動駕駛汽車用戶的整體駕駛體驗。隨著汽車製造商繼續投資這些技術以滿足消費者的期望和監管要求,主動懸吊系統的採用預計會增加,創造市場成長機會。
只能安裝在有限的高階汽車上
透過將主動懸吊系統限制在豪華車上,汽車製造商限制了潛在的市場進入。由於可用車型數量有限,主動懸吊系統的採用率可能仍然較低。許多消費者沒有接觸過或沒有使用過這項技術,即使他們決定將來升級到豪華車,也可能不願意投資它。因此,將其限制在高階汽車上會為消費者帶來更高的成本障礙。這可能會阻礙潛在買家並限制市場滲透。
COVID-19 的影響
封鎖措施和經濟不確定性減少了消費者支出並推遲了汽車購買,影響了對主動懸吊系統的需求。然而,疫情加速了汽車產業的數位轉型和創新,提高了人們對車輛性能和安全先進技術的興趣。隨著行業的復甦,人們將關注彈性和適應性,主動懸吊系統將幫助汽車製造商提高舒適性、操控性和差異化,以滿足不斷變化的消費者偏好和市場需求,預計這將成為優先事項,並且勢頭將會增強。
預計液壓系統產業在預測期內將是最大的
液壓系統領域將出現良好的成長,因為泵浦、油缸和儲液器等液壓元件可以在調整車輛懸吊時實現精確控制和快速反應,提高乘坐舒適性、穩定性和操控性。透過利用液壓技術,主動懸吊系統能夠有效抑制道路擾動並最佳化車輛動力學,提高駕駛員和乘客的舒適性和安全性。這種液壓系統的整合有助於主動汽車懸吊系統的發展和採用。
預計減震器領域在預測期內年複合成長率最高
減震器預計在預測期內將出現最高的年複合成長率,因為它們吸收和耗散動能,減輕道路不平整的影響,實現更平穩的行駛並提高穩定性。先進的減震技術可即時精確調整阻尼力,最佳化不同駕駛條件下的懸吊性能。隨著對卓越乘坐舒適性和改進駕駛動態的需求不斷上升,將創新減震器整合到主動懸吊系統中變得非常重要,並推動汽車市場的成長和普及。
中國、印度和日本等國家消費者購買力的不斷增強,推動了對具有先進功能(包括主動懸吊系統)的豪華汽車的需求。此外,亞太地區各國政府實施了嚴格的安全法規,要求汽車製造商將主動懸吊系統等先進的安全技術融入其車輛中,以滿足監管要求,這也支持了市場的成長。
由於對豪華車和高性能跑車的強勁需求,預計北美地區在預測期內將出現最高的年複合成長率,而這些汽車通常配備主動懸吊技術等先進的懸吊系統。該汽車細分市場的成長有助於市場擴張,汽車製造商積極推廣主動懸吊系統懸吊系統。
According to Stratistics MRC, the Global Automotive Active Suspension System Market is accounted for $47.3 billion in 2023 and is expected to reach $64.9 billion by 2030 growing at a CAGR of 4.6% during the forecast period. An automotive active suspension system employs sensors to monitor vehicle dynamics and road conditions, adjusting individual wheel movements in real-time to optimize ride comfort, stability, and handling. It utilizes actuators, such as hydraulic or electromagnetic systems, to actively control suspension components, including dampers and springs. By continuously adapting to changing road surfaces and driving conditions, active suspension enhances vehicle performance, reduces body roll, improves traction, and minimizes vibration and harshness. This technology enhances overall driving experience, providing a smoother ride and improved control, while also enhancing safety by mitigating the effects of uneven terrain and sudden maneuvers.
Increasing demand for comfort and safety
Consumers prioritize smoother rides and enhanced safety features in vehicles, prompting automakers to integrate advanced suspension systems. Active suspension systems dynamically adjust vehicle suspension in response to road conditions and driver inputs, providing superior comfort, stability, and safety compared to passive systems. As awareness of these benefits grows, so does the adoption of active suspension systems, especially in luxury and high-performance vehicle segments. This trend is expected to continue driving market growth as automakers strive to meet consumer expectations for comfort and safety in their vehicles.
Active suspension systems add complexity to vehicles
While these systems offer superior ride comfort and handling, their integration adds complexity to vehicle design, manufacturing, and maintenance. This complexity may lead to higher production costs, increased weight, and potential reliability issues, deterring some automakers from adopting active suspension technology. Additionally, the need for specialized knowledge and equipment for maintenance and repairs could raise ownership costs. As a result, concerns about complexity may hinder widespread adoption and market penetration of active suspension systems
Growing trend of electric and autonomous vehicles
Electric and autonomous vehicles prioritize efficiency, comfort, and safety, driving demand for advanced suspension systems. Active suspension systems play a crucial role in optimizing ride quality, stability, and handling, thereby enhancing the overall driving experience for electric and autonomous vehicle users. As automakers continue to invest in these technologies to meet consumer expectations and regulatory requirements, the adoption of active suspension systems is expected to rise, creating opportunities for market growth
Available on a limited number of high-end vehicles
By restricting active suspension systems to high-end vehicles, manufacturers limit their potential market reach. With limited availability, the adoption rates of active suspension systems may remain low. Many consumers may not have exposure to or experience with this technology, resulting in reluctance to invest in it even if they upgrade to high-end vehicles in the future. Thus by restricting them to high-end vehicles, the cost barrier becomes even higher for consumers. This can deter potential buyers and limit market penetration.
Covid-19 Impact
Lockdown measures and economic uncertainties led to reduced consumer spending and delayed automotive purchases, affecting demand for active suspension systems. However, the pandemic also accelerated digital transformation and innovation in the automotive sector, driving interest in advanced technologies for vehicle performance and safety. As the industry recovers, there's a growing emphasis on resilience and adaptation, with active suspension systems expected to regain momentum as automakers prioritize comfort, handling, and differentiation to meet evolving consumer preferences and market demands.
The hydraulic systems segment is expected to be the largest during the forecast period
The hydraulic systems segment is estimated to have a lucrative growth, because hydraulic components such as pumps, cylinders, and fluid reservoirs enable precise control and rapid response in adjusting vehicle suspension, resulting in improved ride quality, stability, and handling. The utilization of hydraulic technology allows active suspension systems to effectively mitigate road disturbances and optimize vehicle dynamics, thereby enhancing comfort and safety for drivers and passengers. This integration of hydraulic systems contributes to the growth and adoption of automotive active suspension systems
The shock dampener segment is expected to have the highest CAGR during the forecast period
The shock dampener segment is anticipated to witness the highest CAGR growth during the forecast period, as these dampeners mitigate the impact of road irregularities by absorbing and dissipating kinetic energy, resulting in smoother rides and improved stability. Advanced shock dampening technology allows for precise adjustment of damping force in real-time, optimizing suspension performance for varying driving conditions. As demand for superior ride quality and enhanced driving dynamics continues to rise, the integration of innovative shock dampeners into active suspension systems becomes pivotal, driving growth and adoption in the automotive market
Asia Pacific is projected to hold the largest market share during the forecast period owing to the increasing purchasing power of consumers in countries like China, India, and Japan has fueled the demand for luxury vehicles equipped with advanced features including active suspension systems. Moreover governments across the Asia Pacific region have been implementing stringent safety regulations, prompting automakers to integrate advanced safety technologies such as active suspension systems into their vehicles to meet regulatory requirements drives the growth of the market in this region.
North America is projected to have the highest CAGR over the forecast period, owing to significant demand for luxury vehicles and high-performance sports cars, which often come equipped with advanced suspension systems, including active suspension technology. The growth of this vehicle segment contributes to the expansion and automakers are actively promoting active suspension systems as a premium feature in their vehicles to attract customers of the active suspension system market in the region.
Key players in the market
Some of the key players in the Automotive Active Suspension System Market include Arnott Inc., BENTELER, BWI Group, Continental AG, Duro Shox Pvt Ltd, Endurance Technologies Ltd., Fox Factory Inc., Gabriel India Limited, Hendrickson L.L.C., Hitachi Astemo, Ltd., ITT Inc., KYB Corporation, Mando CORPORATION, Morelli Corporation, SHOWA Corporation, Tenneco Inc., ThyssenKrupp AG, ZF Friedrichshafen AG and Zhejiang Sensen Auto Parts Co., Ltd
In February 2024, Continental collaborates with Startup Nation Central (SNC) to actively seek innovative sustainable materials applicable in automotive technologies. The resulting material has the potential to replace several existing fossil-based components and packaging in the automotive industry.
In February 2024, Continental Strengthens Manufacturing Footprint of its Specialty Tires Production in Sri Lanka. This ensures an optimized manufacturing process and limits cross-country dependencies in logistic supply chain.
In December 2023, Hitachi Astemo, Ltd. announced it will continue sponsorships for the 2024 season of REAL RACING, a competitor in the four-wheel GT500 class of SUPER GT and SI Racing, a competitor in both the two-wheel MFJ*1.
Note: Tables for North America, Europe, APAC, South America, and Middle East & Africa Regions are also represented in the same manner as above.