市場調查報告書
商品編碼
1587652
到 2030 年空氣懸吊市場預測:按零件、車輛、技術、最終用戶和地區進行的全球分析Air Suspension Market Forecasts to 2030 - Global Analysis By Component (Air Springs, Shock Absorbers, Air Compressors, Electronic Control Units (ECU), Height Sensors, and Other Components), Vehicle, Technology, End User and By Geography |
根據Stratistics MRC預測,2024年全球氣壓懸吊市場規模將達72億美元,預計2030年將達到120億美元,預測期內複合年成長率為8.8%。
空氣懸吊是一種使用空氣彈簧或安全氣囊代替傳統鋼彈簧的車輛懸吊。使用壓縮機調整行駛高度和鬆緊度,提供更平穩、更舒適的駕駛體驗。空氣懸吊系統常見於大型車輛、豪華轎車、巴士等,其中貨物處理和舒適性是優先考慮的。空氣懸吊的電子感測器和控制設備可調節安全氣囊內的氣壓,從而提高穩定性、減少振動並提高燃油經濟性。因此,空氣懸吊的主要目的是為服務人員和乘客提供平穩、穩定的乘坐體驗。
提高車輛舒適度和乘坐品質
隨著越來越多的消費者對車輛的舒適性和豪華性的要求越來越高,空氣懸吊系統變得越來越受歡迎。豪華車和豪華車購買者被這些系統所吸引,這些系統可以減少振動並吸收道路不平整情況。此外,製造商認為技術改進,包括可以改變行駛高度和剛性的電子控制系統,使空氣懸吊系統更具吸引力,改善操控性、穩定性和乘客享受,並增加市場成長。
可能漏氣和系統故障
氣壓懸吊系統故障可能導致車主頻繁維修、增加成本並延長停機時間。這也可能降低消費者對空氣懸吊技術的信心,導致需求下降。這些空氣洩漏會導致車輛高度變化並降低穩定性,從而影響高速行駛或惡劣天氣下的安全性。在更嚴重的情況下,整個系統故障可能導致無法控制的情況,增加事故風險並阻礙市場成長。
消費者對平穩舒適乘坐的期望不斷提高
消費者越來越需要先進的空氣懸吊系統來提高舒適度和個人化功能,例如行駛高度和剛性調節。這種需求是由對卓越乘坐舒適性和客製化駕駛體驗能力的渴望推動的,正在推動市場成長,並促使製造商創新和改進空氣懸吊技術。
複雜的技術和維護要求
空氣懸吊系統使用感測器、ECU 和電磁閥等複雜組件,這會增加製造價格,使預算有限的消費者望而卻步,在低成本汽車領域的使用可能會受到限制。此外,這些系統需要定期檢查和維護,包括監控漏氣、保持適當的壓力和修復零件。這可能會阻止想要低維護解決方案的潛在買家。
COVID-19 大流行嚴重擾亂了汽車空氣懸吊市場,造成了嚴重的供應鏈挑戰和生產停頓。由於物流受到影響且原料供應量減少,整個產業的製造業活動放緩。儘管遇到這些挫折,隨著汽車生產的恢復,對空氣懸吊系統的需求預計將恢復,特別是在以舒適性為優先考慮的豪華車領域。
空氣彈簧市場預計將在預測期內成為最大的市場
由於更高的穩定性、減少的車身側傾、可調節的懸吊和改善的乘坐舒適性,空氣彈簧預計將在預測期內成為最大的細分市場,從而使空氣彈簧得到廣泛應用。空氣彈簧透過適應負載和道路條件為巴士、商用卡車和乘用車提供更平穩的行駛,這些技術可以提高操控性和性能,特別是在涉及重負載和越野條件時,這也會影響市場需求。
預計電子控制氣壓懸吊領域在預測期內複合年成長率最高
在預測期內,電子控制氣壓懸吊市場預計將以最高的複合年成長率成長,因為它會根據路況、車輛負載和駕駛風格自動改變懸吊設置,從而提高性能和舒適度。此外,這種整合在高性能和豪華汽車中越來越受歡迎,因為它可以提高轉彎穩定性,最大地減少車身側傾,並即時最佳化動態以提高車輛的操控性,這很常見並創造了需求。
預計北美地區在預測期內將佔據最大的市場佔有率。這是因為北美地區的安全法規正在推動製造商採用先進的懸吊技術,例如空氣懸吊系統,以提高安全性並改善車輛性能。遵守這些法規是採用這些技術來整合永續技術的關鍵驅動力,從而進一步推動市場成長。
由於乘用車和商用車需求的成長將推動汽車產量大幅成長,包括中國、印度和日本在內的亞太地區預計將在預測期內呈現最高成長率。空氣懸吊系統也可用於卡車和巴士等大型商用車輛,提高各種負載情況下的穩定性和乘坐舒適性。因此,隨著越來越多的製造商為其車型配備這些系統,空氣懸吊市場正在不斷擴大。
According to Stratistics MRC, the Global Air Suspension Market is accounted for $7.2 billion in 2024 and is expected to reach $12.0 billion by 2030 growing at a CAGR of 8.8% during the forecast period. Air suspension is a type of vehicle suspension that uses air springs, or air bags, instead of traditional steel springs. It uses a compressor to adjust the ride height and firmness, providing a smoother and more comfortable driving experience. Air suspension systems are commonly found in heavy-duty vehicles, luxury cars, and buses, where load handling and comfort are prioritized. The electronic sensors and control units in air suspension regulate air pressure within air bags, enhancing stability, reducing vibration, and improving fuel efficiency. Thus the main purpose of air suspension is to provide a smooth and constant ride quality to drivers and passengers.
Enhanced vehicle comfort and ride quality
Air suspension systems are becoming more and more popular as a result of consumers' growing desire for comfort and luxury in automobiles. Buyers of luxury and high-end vehicles find these systems appealing since they reduce vibrations and absorb irregularities in the road. Moreover manufacturers find air suspension systems more appealing because of technological improvements including electronically controlled systems that provide changeable ride height and firmness, improving handling, stability, and passenger enjoyment which boosts the market growth.
Potential for air leaks and system failures
Air suspension system failures can lead to frequent repairs, increased costs, and extended downtime for owners. This can also reduce consumer confidence in air suspension technology, leading to a decline in demand. These air leaks can cause uneven ride height and reduced stability, potentially compromising safety at high speeds or adverse weather conditions. In addition severe cases, complete system failure can result in a loss of control, increasing the risk of accidents hampering the market growth.
Increasing consumer expectations for smooth and comfortable vehicle ride
Consumers are increasingly demanding advanced air suspension systems for improved comfort and personalized features, such as adjustable ride height and stiffness. This demand is driven by the desire for superior ride quality and the ability to customize the driving experience, which in turn boosts market growth and encourages manufacturers to innovate and improve air suspension technology.
Complex technology and maintenance requirements
Air suspension systems use sophisticated parts like sensors, ECUs, and solenoid valves, their production prices may go up, which could put off consumers on a tight budget and restrict their use in lower-end car segments. Furthermore, these systems need to be inspected and maintained on a regular basis, which includes monitoring for air leaks, maintaining the right pressure, and repairing components. This could put off prospective purchasers who would rather have low-maintenance solutions.
The COVID-19 pandemic significantly disrupted the automotive air suspension market, causing severe supply chain challenges and production halts. As logistics were affected, the availability of raw materials dwindled, leading to a downturn in manufacturing activities across the sector13. Despite these setbacks, demand for air suspension systems is projected to rebound as vehicle production resumes, particularly in luxury segments where comfort is prioritized.
The air springs segment is expected to be the largest during the forecast period
The air springs segment is expected to be the largest during the forecast period owing to its greater stability, reduced body roll, adjustable suspension, and improved ride quality, air springs are widely used. They provide buses, commercial trucks, and passenger cars a smoother ride by adapting to loads and road conditions, these technologies also affect market demand by improving handling and performance, especially when large loads or off-road situations are involved.
The electronically controlled air suspension segment is expected to have the highest CAGR during the forecast period
During the projection period, the electronically controlled air suspension segment is expected to grow at the highest CAGR as they automatically modify suspension settings according to road conditions, vehicle load, and driving style, improving both performance and comfort. Additionally, especially in high-performance and luxury automobiles, they improve cornering stability, minimize body roll, and optimize dynamics in real-time to improve vehicle handling this integration is common in these markets and is generating demand for them.
The North America is region is projected to account for the largest market share during the forecast period due to North American regions safety regulations are driving manufacturers to adopt advanced suspension technologies, such as air suspension systems, to enhance safety and improve vehicle performance. Compliance with these regulations is a significant driver for adopting these technologies to integrate sustainable technologies which further boosts the market growth.
Asia Pacific is anticipated to witness the highest rate of growth during the forecast period owing to the growing demand for passenger and commercial vehicles is driving a notable increase in vehicle production in the Asia Pacific region, which includes China, India, and Japan. Air suspension systems are also helping heavy commercial vehicles, such as trucks and buses, by improving stability and ride comfort under various load scenarios. Thus as more manufacturers include these systems in their models, the market for air suspension is growing.
Key players in the market
Some of the key players in Air Suspension Market include AccuAir Control Systems, L.L.C., Airlift Company, Arnott Industries, Continental AG , Dunlop Systems and Components, Firestone Industrial Products Company, LLC, Hendrickson International, Hitachi Astemo Ltd., Mando Corporation, SAF Holland, Stemco, Tenneco Inc., ThyssenKrupp AG, Vibracoustic SE, ZF Friedrichshafen AG.
In October 2024, Hitachi Rail unveiled the 'HMAX' AI Solution, Accelerated by NVIDIA, to Optimize Trains, Signaling and Infrastructure. Collaboration with NVIDIA means Hitachi Rail's digital solutions will be powered by the NVIDIA IGX industrial-grade, enterprise-ready edge AI platform, providing powerful AI computing on every asset.
In October 2024, Continental is boosting the production capacity of its tire plant in Rayong, Thailand, by additional 3 million units per year. The gradual expansion plan of the operations stands for a planned total investment of more than 300 million euros (13 billion Thai Baht).