市場調查報告書
商品編碼
1510790
歐洲風力渦輪機塔架市場預測至 2030 年 - 區域分析 - 按塔架類型(管狀鋼塔、格架塔和混合塔)和部署類型(陸上和海上)Europe Wind Turbine Tower Market Forecast to 2030 - Regional Analysis - by Tower Type (Tubular Steel Towers, Lattice Towers, and Hybrid Towers) and Deployment Type (Onshore and Offshore) |
2022年歐洲風力渦輪機塔架市值為25.1615億美元,預計2030年將達到38.4816億美元;預計2022年至2030年複合年成長率為5.5%。
塔架製造成本下降推動歐洲風力渦輪機塔架市場
風塔主要由鋼製成,幾乎佔渦輪機總成本的66-79%;其次是玻璃纖維、塑膠或樹脂(11-16%);鐵(5-17%);以及銅和鋁(1-2%)。風力渦輪機塔架主要由鋼製成。不斷成長的商業和技術進步預計將降低風力渦輪機塔架的製造成本。風力發電塔筒主要材料鋼材價格的下降是風電成本下降的主要原因之一。 2021年,鋼材價格在1000美元/噸之間,下降近40%,2022年達到570-590美元/噸。鋼材價格的持續低迷正在降低風電項目的整體營運費用。風能專案營運成本的下降對風能產業產生了積極影響,從而增加了對風力渦輪機塔架的需求。
歐洲風力渦輪機塔架市場概況
全球暖化和氣候變遷的不利影響提高了全球開發更永續產品的意識。對永續和清潔能源的需求正在推動對風能的需求,預計這將在未來幾年推動風力渦輪機塔架市場的擴張。降低風力發電成本、提高環境污染意識以及鼓勵政府透過財政激勵措施提高風力發電能力的策略預計將推動市場發展。 2022年,歐洲新增陸域風電容量16.7吉瓦。德國、法國、義大利、俄羅斯和英國是歐洲的主要國家。在歐洲,德國在風電裝置容量方面處於領先地位,其次是西班牙、法國、瑞典和英國。
波蘭、丹麥、義大利、荷蘭、葡萄牙、比利時等其他歐洲國家在風能方面也取得了正面成果。根據國家風能協會 (ANEV) 的數據,預計到 2026 年,歐洲將新增風電裝置容量 116 吉瓦。
2020年,英國政府瞄準綠色能源革命,其中離岸風電的發展扮演重要角色。為了滿足這項要求,預計將在英格蘭和威爾斯建造六個新的離岸風電項目,作為該國的下一代離岸風電項目。預計它們將在英國減少碳排放的計劃中發揮重要作用。 2021 年初,英國皇家財產局批准了 6 家固定離岸風電企業,總容量約 8 吉瓦。 2022年7月,德國議會通過了新的陸上風電法,從2025年起每年將陸上風電規模擴大10吉瓦。激勵計劃。因此,有利的政策結構、項目的快速核准以及歐盟委員會加大投資是拉動歐洲新風電場建設所需風機塔架需求的主要因素。
Vestas Wind Systems AS、Siemens Gamesa Renewable Energy SA、GRI Renewable Industries SL、LM Wind Power AS、ZF Friedrichshafen AG 和 Flender International GmbH 是歐洲主要的風力渦輪機塔架製造商。這些製造商不斷致力於開發環保組件,以減輕環境污染程度。例如,2023 年,西門子歌美颯推出了 GreenerTower,這是一種由永續鋼材製成的風力渦輪機塔架。塔樓約 80% 是鋼板製成的。預計新的 GreenerTower 塔鋼板與傳統鋼材相比可減少 63% 的二氧化碳排放。因此,製造商的不斷進步預計將推動未來幾年歐洲風力渦輪機塔架市場的成長。
歐洲風力渦輪機塔架市場收入及 2030 年預測(百萬美元)
歐洲風力渦輪機塔架市場細分
歐洲風力渦輪機塔架市場根據塔架類型、開發類型和國家進行細分。根據塔架類型,歐洲風力渦輪機塔架市場分為管狀鋼塔架、格構塔架和混合塔架。 2022 年,管狀鋼塔細分市場佔據最大的市場佔有率。
從開發類型來看,歐洲風電塔筒市場分為陸域服務和海上服務。 2022年,陸上服務將佔據更大的市場佔有率。
根據國家/地區,歐洲風力渦輪機塔架市場分為法國、德國、義大利、英國、俄羅斯和歐洲其他地區。 2022 年,歐洲其他地區將主導歐洲風力渦輪機塔架市場。
Vestas Wind Systems AS、Siemens Gamesa Renewable Energy SA、Valmont Industries Inc、Nordex SE、KGW Schweriner Maschinen-und Anlagenbau GmbH 和 Cs Wind Corp 是歐洲風力渦輪機塔架市場上的一些領先公司。
The Europe wind turbine tower market was valued at US$ 2,516.15 million in 2022 and is expected to reach US$ 3,848.16 million by 2030; it is estimated to grow at a CAGR of 5.5% from 2022 to 2030.
Decreased Cost of Tower Manufacturing Drives Europe Wind Turbine Tower Market
Wind towers are mainly made of steel, which accounts for almost 66-79% of total turbine cost; followed by fiberglass, plastic, or resin (11-16%); iron (5-17%); and copper and aluminum (1-2%). Wind turbine towers are predominantly made of steel. The growing commercial and technological advancement is anticipated to lower the manufacturing cost of wind turbine towers. The declining prices of steel, which is the main material for wind turbine towers, is one of the major reasons for the dropping cost of wind energy. In 2021, the steel prices were ranging between US$ 1,000 per tonne, and it dropped almost 40% and reached US$ 570-590 per tonne in 2022. The instability of demand for steel in the domestic market of China and the increasing export of steel from China is impacting the steel prices at the global level. The continuous downturn of steel prices is reducing the overall operational expenses of the wind projects. The declining operation cost of wind energy projects is positively impacting the wind energy sector, which is boosting the demand for wind turbine towers.
Europe Wind Turbine Tower Market Overview
The adverse effects of global warming and climate change have increased global awareness toward developing more sustainable products. The requirement for sustainable and clean energy sources is boosting the demand for wind energy, which is estimated to boost the expansion of the wind turbine tower market in the coming years. Reducing cost of wind power generation, growing awareness of environmental pollution, and encouraging government strategies for boosting wind capacity through financial incentives are anticipated to drive the market. In 2022, Europe added 16.7 GW of onshore wind capacity. Germany, France, Italy, Russia, and the UK are among the key countries in Europe. In Europe, Germany is leading in terms of installed wind capacity, followed by Spain, France, Sweden, and the UK.
Other European countries such as Poland, Denmark, Italy, the Netherlands, Portugal, and Belgium are also showing positive outcomes in terms of wind energy. According to the National Wind Energy Association (ANEV), Europe is projected to install 116 GW of new wind power capacity by 2026. Thus, such substantial wind energy potential in Europe is estimated to fuel the market for wind turbine towers during the forecast period.
In 2020, the UK government aimed for a Green Energy Revolution, wherein the development of offshore wind power plays an important role. To comply with this, six new offshore wind projects in England and Wales are anticipated to be built for the next generation of the country's offshore wind projects. They are anticipated to play an important role in the UK's plan to cut carbon emissions. In early 2021, the UK's Crown Estate approved six fixed offshore wind ventures with a collective capacity of ~8 GW. In July 2022, the German Parliament adopted a new Onshore Wind Law to expand onshore wind by a massive 10 GW a year from 2025. Similarly, in July 2021, the European Commission approved France's US$ 30.54 billion renewables incentive program. Thus, favorable policy structure, quick approval of projects, and augmented investment from the European Commission are the major factors boosting the demand for Europe wind turbine tower for the construction of new wind farms.
Vestas Wind Systems AS, Siemens Gamesa Renewable Energy SA, GRI Renewable Industries SL, LM Wind Power AS, ZF Friedrichshafen AG, and Flender International GmbH are among the major wind turbine tower manufacturers in Europe. These manufacturers are continuously working on the development of eco-friendly components to mitigate the level of environmental pollution. For instance, in 2023, Siemens Gamesa introduced GreenerTower, which is a wind turbine tower fabricated of sustainable steel. The towers are of ~80% steel plates. The new GreenerTower is anticipated to certify a CO2 reduction of 63% in the tower steel plates compared to conventional steel. Thus, the increasing advancement of manufacturers is projected to fuel the Europe wind turbine tower market growth in the coming years.
Europe Wind Turbine Tower Market Revenue and Forecast to 2030 (US$ Million)
Europe Wind Turbine Tower Market Segmentation
The Europe wind turbine tower market is segmented based on tower type, development type, and country. Based on tower type, the Europe wind turbine tower market is segmented into tubular steel towers, lattice towers, and hybrid towers. The tubular steel towers segment held the largest market share in 2022.
In terms of development type, the Europe wind turbine tower market is bifurcated into onshore services and offshore services. The onshore services held a larger market share in 2022.
Based on country, the Europe wind turbine tower market is segmented into France, Germany, Italy, the UK, Russia, and the Rest of Europe. The Rest of Europe dominated the Europe wind turbine tower market share in 2022.
Vestas Wind Systems AS, Siemens Gamesa Renewable Energy SA, Valmont Industries Inc, Nordex SE, KGW Schweriner Maschinen-und Anlagenbau GmbH, and Cs Wind Corp are some of the leading companies operating in the Europe wind turbine tower market.