首頁 > 市場調查報告書 > 材料

塑膠

市場調查報告書

商品編碼

1444451

聚酯熱可塑性橡膠（TPE-E）：市場佔有率分析、產業趨勢與統計、成長預測（2024-2029）

Thermoplastic Polyester Elastomer (TPE-E) - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2024 - 2029)

出版日期: 2024年02月15日 | 出版商:

Mordor Intelligence | 英文 180 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

熱可塑性橡膠（TPE-E）市場規模預計到2024年為142,160噸，預計在預測期內（2024-2029年）到2029年將達到176,140噸，期間年複合成長率為4.38%。

2020年，市場受到COVID-19感染疾病的負面影響。疫情對汽車產業造成嚴重影響，包括全球範圍內的生產中斷和供應鏈中斷，進而對市場產生負面影響。然而，由於2021年汽車產業成長擴大，市場穩定復甦。

主要亮點

短期內，汽車產業需求的增加以及醫療保健和醫療設施支出的增加是推動所研究市場成長的主要因素。
然而，聚酯熱可塑性橡膠的高成本預計是抑制預測期內目標產業成長的關鍵因素。
儘管如此，生物基聚酯熱可塑性橡膠的新興市場可能很快就會為全球市場創造利潤豐厚的成長機會。
在亞太地區，由於聚酯基熱可塑性橡膠（TPE-E）在中國、日本和其他東南亞國家的使用持續增加，對聚酯基熱可塑性橡膠（TPE-E）的需求很高。預計目標市場在評估期間將出現健康成長。汽車生產與不斷發展的醫療產業的融合。

聚酯熱可塑性橡膠（TPE-E）市場趨勢

增加在汽車產業的使用

熱可塑性橡膠（TPE-E）是高性能材料，其在汽車產業的應用正在迅速增加。 TPE-E在汽車領域的應用範圍從外飾件、內裝件到引擎零件。 TPE-E 高度耐用、重量輕、性價比高，深受汽車材料製造商的歡迎。
TPE-E 用於汽車行業的各種應用，其中一些包括高品質汽車儀表板、CVJ 防塵罩、輪圈蓋、進氣管、安全氣囊展開門、儀表板組件、立柱裝飾件，包括門襯和把手的製造。座椅靠背、安全帶部件等
TPE-E 耐磨損和振動，並且可以染成任何顏色，從而實現更大的設計彈性。即使在惡劣的天氣條件下也很耐用。因此，它是汽車鎖等內部機構的首選。這些特性也支持了電動車製造中對長期耐熱材料的需求。
汽車產業正在努力將輕質材料用於各種車輛應用。因此，全球不斷成長的汽車工業預計將增加對TPE-E的需求。
根據OICA的數據，2021年全球汽車銷量總計80,154,988輛，較2020年的12,452,453輛成長3%。
印度和中國實施了車輛報廢政策，處理舊車並最大限度地減少污染。目標是車齡超過20年的輕型車達到510萬輛，車齡超過15年的輕型車達到340萬輛。該計劃旨在透過逐步淘汰沒有有效合規證書的陳舊或無法運行的車輛來減少污染。這種方法增加了市場對新車的需求。
2021年全球電動車銷量達6.75億輛，比2020年電動車銷量成長108%。該金額包括小客車、輕型卡車和輕型商用車。截至2021年，純電動車佔電動車總銷量的71%，插電式混合動力車佔29%。
IEA預計，在新的政策情境下，2030年全球電動車銷量預計將達到1.25億輛（不包括兩輪/三輪車）。在EV30 at 30情境中，預計到2030年，中國汽車銷量的約70%將是電動車。此外，根據迄今為止的預期銷量，歐洲的電動車銷售預計比例為50%，而日本為37%，加拿大和美國30%，印度為29%。
因此，由於上述因素，TPE-E的需求預計將在預測期內受到正面影響。

亞太地區主導市場

預計亞太地區將主導市場。在該地區，以GDP計算，中國是最大的經濟體。中國是發展最快的新興經濟體之一，也是當今世界最大的生產國之一。該國的製造業是該國經濟的主要貢獻者之一。
中國是世界上最大的汽車製造國。為了應對日益成長的環境問題，該國的汽車產業準備進行產品變革，重點是生產在確保燃油效率的同時最大限度減少排放氣體的產品。 OICA預計，2021年中國汽車產量將達到2,608萬輛，比2020年的2,523萬輛成長3%，到2025年將增加至3,500萬輛。預計這一產量將推動該國電動車和內燃機汽車製造業對聚酯基熱可塑性橡膠的需求。
中國有完善的一般工業部門。中國國家統計局公佈的資料顯示，2021年全國工業增加價值付加增與前一年同期比較%。 2021年12月全國工業總產值與前一年同期比較增4.3%（較11月增加0.42%）。因此，國內對聚酯熱可塑性橡膠的需求不斷增加。
中國擁有全球最大的電子產品生產基地之一，面臨來自韓國、新加坡和台灣等老牌上游製造商的激烈競爭。智慧型手機、OLED電視和平板電腦等電子產品在消費性電器產品市場領域的需求成長率最高。由於中國經濟的發展和人民生活水準的提高，對電子產品的需求不斷增加。
收入的持續增加預計將增加人均可支配收入，有利於中國對電子產品的需求。中產階級和高所得群體的擴大預計將推動電子產品的需求。根據中國國家統計局的數據，2021年家電及電器產業收益達93,464萬元人民幣（約13,127萬美元）。預計收益年增率為2.04%，到2025年市場規模將達1,756.7億美元。
此外，根據 OICA 的數據，印度在 2021 年生產了約 4,399,112 輛汽車，比 2020 年的 3,381,819 輛成長了 30%。
此外，到 2022 年，該國的醫療保健產業預計將達到 3,720 億美元，這主要是由於健康意識的提高、保險的普及、收入的增加和疾病發病率的上升。印度的醫療保健產業受益於每年 1.6% 的人口成長。
近年來，印度工業部門成長迅速。印度工業生產指數（IIP）從2020-21年的111.7上升至2021-22年的128.7。這一成長也受到了各種政府舉措的推動，例如國家製造業政策（旨在到2025 年將製造業佔GDP 的比重提高到25%）和製造業PLI 計劃（2022 年推出）的支持，從而增加了需求用於製造。國產聚酯熱可塑性橡膠。
根據印度品牌股權基金會（IBEF）預測，到2025年，印度電子製造業的產值預計將達到5,200億美元。由於政府透過「印度製造」等政策採取的舉措，印度的電氣和電子產品產量預計將迅速成長。
由於所有這些因素，預計該地區的聚酯熱可塑性橡膠市場在預測期內將穩定成長。

聚酯熱可塑性橡膠（TPE-E）產業概況

全球熱可塑性橡膠（TPE-E）市場本質上是整合的，頂級上市公司在全球市場中佔據主要佔有率。全球公司正專注於研發、收購和合作，以開發新技術並提高其市場佔有率和立足點。研究市場的主要製造商包括杜邦、塞拉尼斯公司、Koninklijke DSM NV、LG Chem、東洋紡等。

其他福利

Excel 格式的市場預測 (ME) 表
3 個月分析師支持

類型
- 射出成型級
- 擠壓等級
- 其他類型
最終用戶產業
- 車
- 衛生保健
- 工業的
- 電氣和電子
- 消費品
- 其他最終用戶產業
地區
- 亞太地區
  - 中國
  - 印度
  - 日本
  - 韓國
  - 其他亞太地區
- 北美洲
  - 美國
  - 加拿大
  - 墨西哥
- 歐洲
  - 德國
  - 英國
  - 義大利
  - 法國
  - 其他歐洲國家
- 南美洲
  - 巴西
  - 阿根廷
  - 南美洲其他地區
- 中東和非洲
  - 沙烏地阿拉伯
  - 南非
  - 其他中東和非洲

第6章競爭形勢

併購、合資、合作與協議
市場排名分析
主要企業採取的策略
公司簡介
- Celanese Corporation
- Chang Chun Group
- DSM
- Kolon Plastic Inc.
- LG Chem
- Mitsubishi Chemical Corporation
- Radici Partecipazioni SpA
- Sichuan Sunshine Plastics Co. Ltd
- SK Chemicals
- Toyobo Co. Ltd

第7章市場機會與未來趨勢

生物基聚酯熱可塑性橡膠的新興市場

簡介目錄

Product Code: 60928

The Thermoplastic Polyester Elastomer Market size is estimated at 142.16 kilotons in 2024, and is expected to reach 176.14 kilotons by 2029, growing at a CAGR of 4.38% during the forecast period (2024-2029).

Thermoplastic Polyester Elastomer (TPE-E) - Market

The market was negatively impacted by COVID-19 in 2020. The pandemic had a severe impact on the automotive industry, including manufacturing interruptions and disruption in the supply chain across the globe, thereby negatively affecting the market. However, the market recovered steadily, owing to the increased growth of the automotive industry in 2021.

Key Highlights

Over the short term, growing demand from the automotive industry, coupled with growing expenditure on healthcare and medical facilities, are major factors driving the growth of the market studied.
However, the high cost of thermoplastic polyester elastomer is a key factor anticipated to restrain the growth of the target industry over the forecast period.
Nevertheless, the emerging market for bio-based thermoplastic polyester elastomer is likely to create lucrative growth opportunities for the global market soon.
Asia-Pacific is estimated to witness healthy growth over the assessment period in the studied market due to the high demand for thermoplastic polyester elastomer (TPE-E) in China, Japan, and other Southeast Asian countries owing to continuous and rising usage of TPEE in automotive production, coupled with the growing medical industry.

Thermoplastic Polyester Elastomer (TPE-E) Market Trends

Increasing Usage in the Automotive Industry

Thermoplastic polyester elastomers (TPE-E) are high-performance materials whose application in the automotive industry has rapidly increased. TPE-E utilization in the automotive sector extends from the exterior and interior parts to engine components. The high durability, light weight, and cost-effectiveness of TPE-Es make them extremely coveted by automotive materials manufacturers.
TPE-Es serve the automotive industry in several applications, some of which include the manufacturing of high-quality automotive instrument panels, CVJ boots, wheel covers, air intake ducting, airbag deployment doors, dashboard components, pillar trim, door liners and handles, seat backs, and seat belt components, among others.
TPE-Es offer high design flexibility by being resistant to abrasion and vibration and dyeable in any desired color. They are highly durable in harsh weather conditions; hence they are preferred for internal mechanisms such as car locks. These properties also support the demand for long-term heat-resistant materials in electric vehicle fabrication.
The automotive industry is working on utilizing lightweight materials for various vehicle applications. Hence, the growing automotive industry globally is expected to boost the demand for TPE-Es.
According to OICA, the global sales of all vehicles in 2021 acoounted for 80,154,988 units, registering a growth of 3% as compared to 12,452,453 units sold in 2020.
Vehicle scrappage policies are being implemented in India and China to scrap outdated vehicles and minimize pollution. It plans to cover 51 lakh light motor vehicles older than 20 years and 34 lakh light motor vehicles older than 15 years. This program aims to reduce pollution by phasing out obsolete or inoperable vehicles that do not have a valid fitness certificate. This approach will raise market demand for new cars.
The global EV sales reached 675 million units in the entire year of 2021, 108% more as compared to the EV sales in 2020. This volume includes passenger vehicles, light trucks, and light commercial vehicles. The BEVs stood for 71% of total EV sales, while the PHEVs stood at 29% in 2021.
According to the IEA, in 2030, global electric vehicle sales are expected to reach 125 million, per the New Policies Scenario (excluding two/three-wheelers). In the EV30 at 30 Scenario, in 2030, around 70% of vehicle sales in China are expected to be EVs. Also, as per the approximate sales value till now, EV sales in Europe was estimated at 50%, while it was 37% in Japan, 30% in Canada and the United States, and 29% in India.
Therefore, owing to the above factors, the demand for TPE-E is expected to be impacted positively during the forecast period.

Asia-Pacific Region to Dominate the Market

Asia-Pacific is expected to dominate the market. In the region, China is the largest economy in terms of GDP. China is one of the fastest emerging economies and has become one of the biggest production houses in the world today. The country's manufacturing sector is one of the primary contributors to the country's economy.
China is the largest manufacturer of automobiles in the world. The country's automotive sector has been shaping up for product evolution, focusing on manufacturing products to ensure fuel economy while minimizing emissions, owing to the growing environmental concerns. In 2021, according to the OICA, the automotive production in the country reached 26.08 million, which increased by 3%, compared to 25.23 million vehicles produced in 2020, and is expected to grow up to 35 million vehicles by 2025. The increase in automotive production is estimated to drive the demand for thermoplastic polyester elastomers in the country from both EVs and IC engine vehicle manufacturing sectors.
China has a well-established general industrial sector. According to the data published by China's National Bureau of Statistics, the country's value-added industrial output went up 9.6% Year-on-Year in 2021. The country's industrial output grew 4.3% Y-o-Y in December 2021 (a 0.42 % increase from November), thereby increasing the demand for thermoplastic polyester elastomers in the country.
China has one of the world's largest electronics production bases and offers tough competition to the existing upstream producers, such as South Korea, Singapore, and Taiwan. Electronic products, such as smartphones, OLED TVs, and tablets, have the highest growth rates in the consumer electronics segment of the market in terms of demand. Economic development in China and improving living standards among the population drive the demand for electronic goods.
The continuous growth of income resulted in the rise in the population's per capita disposable income, which is expected to benefit the demand for electronic goods in China. The expansion of the middle class and high-income population group is expected to propel the demand for electronics. According to the National Bureau of Statistics of China, the revenue in the consumer electronics and household appliances segment reached CNY 934.64 million (approx. USD 131.27 million) in 2021. The revenue is expected to show an annual growth rate of 2.04%, resulting in a projected market volume of USD 175,670 million by 2025.
Further, in India, as per OICA, around 4,399,112 vehicles were produced in 2021, which increased by 30%, comparison to 3,381,819 units manufactured in 2020.
Also, the healthcare sector in the country is expected to reach USD 372 billion by 2022, mainly driven by increasing health awareness, access to insurance, rising income, and diseases. The medical sector in India is benefiting from the growing population at a rate of 1.6 % per year.
India has witnessed rapid growth in the industrial sector in recent years. The index of industrial production (IIP) in India increased from 111.7 in 2020-21 to 128.7 in the 2021-22 period. This growth is also supported by various government initiatives like the National Manufacturing Policy (which aims to increase the share of manufacturing in GDP to 25% by 2025) and the PLI scheme for manufacturing (which was launched in 2022), thereby increasing the demand for thermoplastic polyester elastomers in the country.
According to the India Brand Equity Foundation (IBEF), the Indian electronics manufacturing industry is expected to reach USD 520 billion by 2025. Electrical and electronics production in India is expected to increase rapidly due to government initiatives with policies, such as Make in India, the National Policy of Electronics, Net Zero Imports in Electronics, and the Zero Defect Zero Effect. Such policies offer a commitment to growth in domestic manufacturing, lowering import dependence and energizing exports and manufacturing, like the 'Make in India' program, to make the country self-reliant.
Due to all such factors, the market for thermoplastic polyester elastomer in the region is expected to have a steady growth during the forecast period.

Thermoplastic Polyester Elastomer (TPE-E) Industry Overview

The global thermoplastic polyester elastomer (TPE-E) market is consolidated in nature, as the top listing companies hold a significant share of the global market. Global companies are significantly focusing on R&D, acquisitions, and collaborations to develop new technologies and to increase their market presence and foothold. The major manufacturers in the market studied include Dupont, Celanese Corporation, Koninklijke DSM N.V., LG Chem, and Toyobo Co., Ltd., among others.

Additional Benefits:

The market estimate (ME) sheet in Excel format
3 months of analyst support

1 INTRODUCTION

1.1 Study Assumptions
1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS

4.1 Drivers
- 4.1.1 Increasing Demand From the Automotive Industry
- 4.1.2 Growing Expenditure on Healthcare And Medical Facilities
4.2 Restraints
- 4.2.1 High Cost of Thermoplastic Polyester Elastomer
4.3 Industry Value Chain Analysis
4.4 Porter's Five Forces Analysis
- 4.4.1 Bargaining Power of Suppliers
- 4.4.2 Bargaining Power of Buyers
- 4.4.3 Threat of New Entrants
- 4.4.4 Threat of Substitute Products and Services
- 4.4.5 Degree of Competition

5 MARKET SEGMENTATION (Market Size in Volume)

5.1 Type
- 5.1.1 Injection Molding Grade
- 5.1.2 Extrusion Grade
- 5.1.3 Other Types
5.2 End-user Industry
- 5.2.1 Automotive
- 5.2.2 Healthcare
- 5.2.3 Industrial
- 5.2.4 Electrical and Electronics
- 5.2.5 Consumer Goods
- 5.2.6 Other End-user Industries
5.3 Geography
- 5.3.1 Asia-Pacific
  - 5.3.1.1 China
  - 5.3.1.2 India
  - 5.3.1.3 Japan
  - 5.3.1.4 South Korea
  - 5.3.1.5 Rest of Asia-pacific
- 5.3.2 North America
  - 5.3.2.1 United States
  - 5.3.2.2 Canada
  - 5.3.2.3 Mexico
- 5.3.3 Europe
  - 5.3.3.1 Germany
  - 5.3.3.2 United Kingdom
  - 5.3.3.3 Italy
  - 5.3.3.4 France
  - 5.3.3.5 Rest of Europe
- 5.3.4 South America
  - 5.3.4.1 Brazil
  - 5.3.4.2 Argentina
  - 5.3.4.3 Rest of South America
- 5.3.5 Middle East & Africa
  - 5.3.5.1 Saudi Arabia
  - 5.3.5.2 South Africa
  - 5.3.5.3 Rest of Middle East & Africa

6 COMPETITIVE LANDSCAPE

6.1 Mergers and Acquisitions, Joint Ventures, Collaborations, and Agreements
6.2 Market Ranking Analysis
6.3 Strategies Adopted by Leading Players
6.4 Company Profiles
- 6.4.1 Celanese Corporation
- 6.4.2 Chang Chun Group
- 6.4.3 DSM
- 6.4.4 Kolon Plastic Inc.
- 6.4.5 LG Chem
- 6.4.6 Mitsubishi Chemical Corporation
- 6.4.7 Radici Partecipazioni SpA
- 6.4.8 Sichuan Sunshine Plastics Co. Ltd
- 6.4.9 SK Chemicals
- 6.4.10 Toyobo Co. Ltd