查看購物車
  • Simplified Chinese
  • English
  • Japanese
  • Korean
封面
市場調查報告書
商品編碼
1445567

資料轉換器 - 市場佔有率分析、產業趨勢與統計、成長預測（2024 - 2029）

Data Converter - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2024 - 2029)
出版日期: | 出版商: Mordor Intelligence | 英文 120 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

資料轉換器市場規模預計到2024年為 56 億美元，預計到2029年將達到 75.3 億美元，在預測期內（2024-2029年）CAGR為 6.10%。

資料轉換器 - 市場

高效能電子系統使用越來越多的高效能資料轉換器來改善和塑造架構並開啟新的應用前景。最先進調製器前沿的新興電路和系統技術推動其性能向前發展，並催生新一代資料轉換器。此外，當前和未來的趨勢取決於新舊因素，包括全球經濟、技術演變和行銷。

主要亮點

  • 擴大採用技術先進的資料採集系統推動了市場的發展。多重訊號中的高編碼資訊率迫使資料擷取（DAQ）系統從研究工作發展到現代工程流程。該行業正朝著模組化硬體和靈活軟體相結合的趨勢發展，其中這些較新的模組化系統具有適當的訊號調理和類比數位轉換（ADC），以及支援多種資料擷取要求的各種介面感測器。
  • 考慮到當今的要求，執行特定 DAQ 任務的傳統方法是不可行的。因此，市場傾向於更軟體定義的 DAQ 方法以及支援 USB 的高速 DAQ 的出現。
  • 此外，科學和醫學應用對高解析度影像不斷成長的需求推動市場研究。資料轉換器在所需的動態範圍、解析度、精度、線性度和雜訊方面構成了醫學影像對電子設計提出的最嚴峻的挑戰。 ADC（類比到數位）必須具有至少24 位元的高解析度才能獲得更好、更清晰的影像，並具有快速取樣率以數位化偵測器讀數，在CT（電腦斷層掃描）解決方案中讀數可短至100 µs。 ADC 取樣率還必須支援多工，這樣可以使用更少的轉換器，並減少整個系統的尺寸和功耗。
  • Analog Devices 等公司滿足了這些要求，並為關鍵訊號鏈功能塊提供高度整合的解決方案，以實現一流的臨床成像設備。其產品，如 ADAS1256（X 光應用）、ADAS1135、ADAS1134（CT 應用）等，推動了醫療應用市場的發展。
  • 此外，低功耗資料轉換器的開發對市場的成長提出了挑戰。功耗是當今積體電路的主要設計限制之一。低頻生物電訊號的轉換不需要高速，但需要超低功耗操作。再加上所需的轉換精度，使得設計這類 ADC 成為一項重大挑戰。
  • 此外，由於COVID-19大流行的影響，國際上對半導體產業的供需影響很大。資料轉換器的發展需要IC、電阻、電容等。配銷通路的斷裂導致資料轉換器市場成長緩慢。然而，許多中央和地方政府已經認知到半導體產業的戰略重要性，並在強制停業期間優先考慮國內公司和供應商的不間斷營運。

資料轉換器市場趨勢

電信將佔據重要市場佔有率

  • 由於 4G 通訊和新興 5G 通訊的出現，電信基礎設施刺激市場成長。無線基礎設施（尤其是 4G 和 5G）製造商不斷減少新安裝的無線基礎設施的尺寸和成本，同時堅持高標準的性能、功能和服務品質。資料轉換模組是無線基礎架構設計中的關鍵功能。類比數位轉換器（ADC）是將輸入的中頻（IF）訊號數位化的基本模組，然後將數位資料傳遞到數位下變頻器。
  • 透過將頻率轉換和濾波從類比域轉移到數位域，可以滿足 5G 解決方案的寬頻寬需求。兩個 RF 轉換器是這數位化浪潮的一部分：AD9081/AD9082 混合訊號 RF 轉換器，由類比設備推出。它們經過精心設計，可在與單頻段無線電相同的佔地面積內安裝多頻段無線電，與當今 4G LTE 基地台的可用呼叫容量相比，這有助於將呼叫容量提高三倍。
  • 此外，5G 解決方案必須緊密整合成無線電架構核心，以支援小型天線部署。一種解決方案是將多千兆取樣 ADC 和 DAC 與系統單晶片（SoC）結合的傳統方法。這種方法提供了執行嵌入式系統設計和解決增加的所需操作頻寬的能力。有些資料轉換器使用 JESD204B 實作介面。
  • 此外，在過去十年中，Xilinx 等 FPGA 製造商一直在透過縮小矽製造結構尺寸來改進技術，降低裝置的尺寸、重量和功耗（SWaP）值。 Xilinx 最新的系統單晶片（SoC）裝置 RFSoC 由 FPGA 結構組成，ARM 處理器、類比數位轉換器（ADC）和數位類比轉換器（DAC）均位於同一晶片上。
  • 這種 16 nm 技術的每個設備具有超過 4.2K DSP 片、四個 1.5 GHz A53 Arm 處理器、兩個 600 MHz R5 ARM 處理器、八個 4 GHz 12 位元 ADC 和八個 6.4 GHz 14 位元 DAC 。 COTS（商業現貨）製造商可以使用這種改變遊戲規則的技術為開發 5G 無線電產品的工程師提供多通道 SDR 收發器。

北美將佔據最大市場佔有率

  • 由於電信業的成長和 FPGA（現場可編程閘陣列）的使用，北美地區佔據了最高的佔有率。消費性電子產品對高解析度影像的 A2D 轉換器的需求不斷成長，已成為推動市場發展的重要組成部分。
  • 此外，汽車中需要資料轉換器的感測器應用範圍從識別不同引擎狀態的溫度感測器到支援汽車駕駛輔助系統（ADAS）的雷達/雷射雷達。其他資料轉換器應用包括用於與其他車輛或固定網路通訊的無線收發器。曾促進美國電動車銷量的每輛車 7,500 美元的稅收抵免計劃將被廢除，且獎勵上限不會增加。
  • 此外，關稅風險也迫使外國公司在北美購物。福斯汽車宣布斥資8億美元在田納西州查塔努加建立製造工廠。此外，豐田和馬自達聯手在阿拉巴馬州亨茨維爾建造一家組裝廠。該工廠耗資約16億美元，年產能30萬台。這些情況預計將促進該地區汽車領域資料轉換器市場的成長。
  • 此外，據估計，IT 和電信應用在美國資料轉換器市場中佔有最大佔有率。該成長是由 4G 網路的發展所推動的，其卓越的調製和天線方法可改善語音和資料服務，增加了對 AMS 模組的需求。
  • 此外，根據 GSMA 的資料，在美國，未來三年 5G 採用率佔行動連線的比例預計將分別成長 33%、40%和 46%。這進一步促進了 5G資料轉換器應用的成長。

資料轉換器行業概況

隨著全球廠商在消費性電子和汽車等各種應用中整合訊號，資料轉換器市場變得支離破碎，這使得競爭對手之間的競爭更加激烈。主要參與者有 Analog Devices, Inc.、Microchip Technology Inc. 等。

  • 2022年 5月：Analog Devices Inc. 推出了新一代 16 至 24 位元超高精度 SAR ADC 的新產品組合，以簡化為儀器、工業和醫療保健應用設計 ADC 的複雜流程。 ADI 的 Easy Drive 專利技術和適應性強的 Flexi-SPI 序列週邊介面（SPI）是新型高效能 SAR ADC 系列的兩個方面，可解決系統設計問題並增加直接相容配套產品的範圍。
  • 2022年 9月：MaxLinear Inc. 和 RFHIC 宣布合作開發適用於 5G 宏蜂巢式無線電的 400MHz 功率放大器（PA）解決方案，並可投入生產。此解決方案將使用 MaxLinear MaxLIN 數位預失真（DPD）和波峰因數降低（CFR）技術來增強 RFHIC 最新 ID-400W 系列 GaN RF 電晶體的效能。

附加優惠：

  • Excel 格式的市場估算（ME）表
  • 3 個月的分析師支持

目錄

第1章 簡介

  • 市場定義和範圍
  • 研究假設

第2章 研究方法

第3章 執行摘要

第4章 市場洞察

  • 市場概況
  • 產業利害關係人分析
  • 產業吸引力－波特五力分析
    • 供應商的議價能力
    • 消費者的議價能力
    • 新進入者的威脅
    • 替代產品的威脅
    • 競爭激烈程度

第5章 市場動態

  • 市場促進因素
    • 越來越多採用技術先進的資料採集系統
    • 科學和醫學應用對高解析度影像的需求不斷成長
  • 市場挑戰
    • 低功耗資料轉換器開發的挑戰
  • COVID-19大流行對全球半導體供應鏈分佈的影響

第6章 關鍵技術投資

  • 雲端技術
  • 人工智慧
  • 網路安全
  • 數位服務

第7章 市場細分

  • 依類型
    • 類比數位轉換器
    • 數位類比轉換器
  • 依最終用戶
    • 汽車
    • 電信
    • 消費性電子產品
    • 工業
    • 醫療
    • 其他最終用戶
  • 地理
    • 北美洲
      • 美國
      • 加拿大
    • 歐洲
      • 德國
      • 英國
      • 法國
      • 義大利
      • 歐洲其他地區
    • 亞太
      • 印度
      • 中國
      • 日本
      • 亞太其他地區
    • 世界其他地區

第8章 競爭格局

  • 公司簡介
    • Analog Devices Inc.
    • Microchip Technology Inc.
    • STMicroelectronics NV
    • NXP Semiconductors NV
    • Texas Instruments Incorporated
    • Mouser Electronics Inc.
    • DATEL Inc.
    • Synopsys Inc.
    • Cirrus Logic Inc.
    • Maxim Integrated Products Inc.

第9章 投資分析

第10章 市場機會與未來趨勢

簡介目錄
Product Code: 69119

The Data Converter Market size is estimated at USD 5.60 billion in 2024, and is expected to reach USD 7.53 billion by 2029, growing at a CAGR of 6.10% during the forecast period (2024-2029).

Data Converter - Market

High-performance electronic systems use more and more high-performance data converters to improve and shape the architecture and open new application perspectives. The emerging circuits and systems techniques at the forefront of state-of-the-art modulators are pushing their performance forward and giving rise to new generations of data converters. Further, the current and future trend depends on old and new factors, including the global economy, technological evolution, and marketing.

Key Highlights

  • Increasing adoption of technologically advanced data acquisition systems drives the market. The high rates of encoded information in multiple signals forced data acquisition (DAQ) systems to evolve from research work to modern engineering processes. The industry is evolving toward a trend of having a combination of modular hardware and flexible software, where these newer modular systems have appropriate signal conditioning and analog-to-digital conversion (ADC), with various interfacing sensors that support multiple data acquisition requirements.
  • The traditional approach for performing specific DAQ tasks is not feasible, considering today's requirements. Thus, a market tends toward a more software-defined approach to DAQ and the emergence of high-speed USB-enabled DAQs.
  • Furthermore, the growing demand for high-resolution images in scientific and medical applications is driving the market studied. Data converters constitute the most demanding challenge medical imaging imposes on the electronics design in terms of required dynamic range, resolution, accuracy, linearity, and noise. The ADC (analog to digital) must have a high resolution of at least 24 bits to achieve better and sharper images and a fast sampling rate to digitize detector readings that can be as short as 100 µs in a CT (computed tomography) solution. The ADC sampling rate must also enable multiplexing, which would allow the use of fewer converters as well as the reduction of the size and power of the entire system.
  • A company such as Analog Devices addresses these requirements and offer highly integrated solutions for the key signal chain functional blocks to enable best-in-class clinical imaging equipment. Its products, such as ADAS1256 (X-ray applications), ADAS1135, ADAS1134 (CT applications), and many more, drive the market in medical applications.
  • Further, the development of low-power consumption data converters challenges the market's growth. Power consumption is one of the leading design constraints in today's integrated circuits. Conversion of the low-frequency bioelectric signals does not require high speed but requires an ultra-low-power operation. This, combined with the required conversion accuracy, makes designing such ADCs a major challenge.
  • Further, due to the impact of the COVID-19 pandemic, there is a high effect internationally on supply-demand in the semiconductor industry. For the development of data converters, there is a need for ICs, resistors, capacitors, etc. The breakage in the distribution channel holds slow growth for the data converter market. However, many central and local governments have recognized the strategic importance of the semiconductor industry and prioritized uninterrupted operations for their domestic companies and suppliers in the midst of mandated business closures.

Data Converter Market Trends

Telecommunication to Account for Significant Market Share

  • Telecommunication infrastructure is stimulating market growth owing to the advent of 4G communication and the emerging 5G communication. Manufacturers of wireless infrastructure, especially 4G and 5G, are constantly reducing the size and cost of newly installed wireless infrastructure while holding to high standards of performance, functionality, and quality of service. The data conversion block is a critical function in wireless infrastructure designs. The analog-to-digital converter (ADC) is the fundamental block that digitizes the incoming intermediate frequency (IF) signal and then passes the digital data to the digital downconverter.
  • The wide bandwidth demands of the 5G solution can be met by moving frequency translation and filtering from the analog to the digital domain. Two RF converters are part of this digitization wave: the AD9081/AD9082 mixed-signal RF converters, which analog devices introduce. They have been engineered to install multi-band radios in the same footprint as single-band ones, which helps to increase call capacity three-fold, compared to the call capacity available in today's 4G LTE base stations.
  • Further, the radio architecture core must be tightly integrated for a 5G solution to support small antenna deployments. One solution is the traditional approach combining multi-Giga sample ADCs and DACs with a System-on-Chip (SoC). This approach provides the ability to perform the embedded system design and to address the increased required operating bandwidths. Several data converters implement interfaces using JESD204B.
  • Also, over the past ten years, FPGA manufacturers like Xilinx have been improving technology by reducing the silicon fabrication structure size and, as a result, the device's size, weight, and power (SWaP) values. The latest system-on-chip (SoC) device from Xilinx, the RFSoC, consists of FPGA fabric with arm processors, analog-to-digital converters (ADCs), and digital-to-analog converters (DACs) all on the same chip.
  • This 16-nm technology has over 4.2K DSP slices, four 1.5-GHz A53 Arm processors, two 600-MHz R5 ARM processors, eight 4-GHz, 12-bit ADCs, and eight 6.4-GHz, 14-bit DACs per device. COTS (Commercial-off-the-shelf) manufacturers can use this game-changing technology to provide multichannel, SDR transceivers for engineers developing 5G radio products.

North America to Hold the Largest Market Share

  • North America holds the highest share due to the growth in the telecom sectors and the use of FPGA (field-programmable gate array). The rising demand for A2D converters in consumer electronics for high-resolution images has become an essential part of driving the market.
  • Further, sensor applications in automotive that require data converters range from temperature sensors identifying different engine statuses to radar/LIDAR enabling automotive driver assistance systems (ADAS). Other data converters applications include wireless transceivers for communicating with other vehicles or fixed networks. The USD 7,500 per vehicle tax credit that has boosted EV sales in the United States is drafted to be repealed without any increment in the upper limit of the incentive.
  • Also, tariff risk is compelling foreign companies to shop in North America. Volkswagen announced spending USD 800 million to build a manufacturing facility in Chattanooga, Tennessee. Further, Toyota and Mazda are joining forces to construct an assembly plant in Huntsville, Alabama. The factory, which costs about USD 1.6 billion, would have a production capacity of 300,000 units per year. These instances are expected to increase the data converter market's growth in the region's automotive segments.
  • Further, IT and telecommunications applications were estimated to have the largest share of the data converter market in the United States. The growth is driven by the development of the 4G network, with superior modulation and antenna methods for improved voice and data services, which enhances the demand for the AMS blocks.
  • Further, according to GSMA, in the United States, the 5G adoption rate as a share of mobile connections is expected to increase by 33%, 40%, and 46% in the coming three years, respectively. This further enhances the growth of applications in 5G for data converters.

Data Converter Industry Overview

The data converter market is fragmented as the global players integrate signals in various applications like consumer electronics and automotive, which gives an intense rivalry among the competitors. Key players are Analog Devices, Inc., Microchip Technology Inc., etc.

  • May 2022: Analog Devices Inc. introduced a new portfolio of next-generation 16- to 24-bit, ultrahigh-precision SAR ADCs to simplify the complicated process of designing ADCs for instrumentation, industrial, and healthcare applications. The patented Easy Drive technology and the adaptable Flexi-SPI serial peripheral interface (SPI) of ADI are two aspects of the new high-performance SAR ADC series that address system design issues and increase the range of directly compatible companion products.
  • September 2022: MaxLinear Inc. and RFHIC announced a collaboration to develop a 400MHz Power Amplifier (PA) solution for 5G Macrocell Radios that is production-ready. This solution will use MaxLinear MaxLIN Digital Predistortion (DPD) and Crest Factor Reduction (CFR) technologies to enhance the performance of RFHIC's newest ID-400W series GaN RF Transistors.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Market Definition and Scope
  • 1.2 Study Assumptions

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET INSIGHTS

  • 4.1 Market Overview
  • 4.2 Industry Stakeholder Analysis
  • 4.3 Industry Attractiveness - Porter's Five Forces Analysis
    • 4.3.1 Bargaining Power of Suppliers
    • 4.3.2 Bargaining Power of Consumers
    • 4.3.3 Threat of New Entrants
    • 4.3.4 Threat of Substitute Products
    • 4.3.5 Intensity of Competitive Rivalry

5 MARKET DYNAMICS

  • 5.1 Market Drivers
    • 5.1.1 Increasing Adoption of Technologically Advanced Data Acquisition Systems
    • 5.1.2 Growing Demand for High-Resolution Images in Scientific and Medical Applications
  • 5.2 Market Challenges
    • 5.2.1 Challenges in the Development of Low-power Consumption Data Converters
  • 5.3 Impact of the COVID-19 Pandemic in Supply Chain Distribution of Semiconductors Globally

6 KEY TECHNOLOGY INVESTMENTS

  • 6.1 Cloud Technology
  • 6.2 Artificial Intelligence
  • 6.3 Cyber Security
  • 6.4 Digital Services

7 MARKET SEGMENTATION

  • 7.1 By Type
    • 7.1.1 Analog to Digital Converter
    • 7.1.2 Digital to Analog Converter
  • 7.2 By End User
    • 7.2.1 Automotive
    • 7.2.2 Telecommunication
    • 7.2.3 Consumer Electronics
    • 7.2.4 Industrial
    • 7.2.5 Medical
    • 7.2.6 Other End Users
  • 7.3 Geography
    • 7.3.1 North America
      • 7.3.1.1 United States
      • 7.3.1.2 Canada
    • 7.3.2 Europe
      • 7.3.2.1 Germany
      • 7.3.2.2 United Kingdom
      • 7.3.2.3 France
      • 7.3.2.4 Italy
      • 7.3.2.5 Rest of Europe
    • 7.3.3 Asia-Pacific
      • 7.3.3.1 India
      • 7.3.3.2 China
      • 7.3.3.3 Japan
      • 7.3.3.4 Rest of Asia-Pacific
    • 7.3.4 Rest of the World

8 COMPETITIVE LANDSCAPE

  • 8.1 Company Profiles
    • 8.1.1 Analog Devices Inc.
    • 8.1.2 Microchip Technology Inc.
    • 8.1.3 STMicroelectronics NV
    • 8.1.4 NXP Semiconductors NV
    • 8.1.5 Texas Instruments Incorporated
    • 8.1.6 Mouser Electronics Inc.
    • 8.1.7 DATEL Inc.
    • 8.1.8 Synopsys Inc.
    • 8.1.9 Cirrus Logic Inc.
    • 8.1.10 Maxim Integrated Products Inc.

9 INVESTMENT ANALYSIS

10 MARKET OPPORTUNITIES AND FUTURE TRENDS