市場調查報告書
商品編碼
1533091
到 2030 年北美風力渦輪機複合材料市場預測 - 區域分析 - 按纖維類型、樹脂類型、技術和應用North America Wind Turbine Composites Market Forecast to 2030 - Regional Analysis - by Fiber Type, Resin Type, Technology, and Application |
2022年北美風力渦輪機複合材料市值為15.3836億美元,預計到2030年將達到35.0765億美元;預計2022年至2030年複合年成長率為10.9%。
風力渦輪機葉片長度的增加推動了北美風力渦輪機複合材料市場
風力渦輪機葉片借助其彎曲形狀產生升力。轉子葉片的設計能夠產生適量的轉子葉片升力和推力,從而產生最佳的空氣減速並提高葉片效率。風力渦輪機葉片的形狀能夠以較低的建造成本從風中提取最大功率。因此,風力渦輪機葉片製造商始終期待製造更有效率的葉片設計。人們對風力葉片的設計進行了持續改進,以產生相對更緊湊、更安靜且能夠以更少的風力產生更多電力的新型風力渦輪機設計。這包括增加葉片的長度以提高效率。
風力渦輪機的效率主要取決於葉片的空氣動力學形狀和長度,以及用於生產葉片的材料。風力渦輪機葉片是風力渦輪機中最重要但成本最高的零件。複合材料在葉片應用中的使用取決於材料提供的強度和剛度以及低密度。透過增加風力渦輪機葉片的長度,與那些較小的葉片相比,可以多產生 7.5% 的電力。公司不斷致力於開發輕質、經濟高效且環保的材料來生產風力渦輪機葉片。這項因素正在推動風力渦輪機對先進複合材料的需求,從而推動市場成長。
北美風力渦輪機複合材料市場概況
北美風力渦輪機複合材料市場分為美國、加拿大和墨西哥。美國是該地區市場成長的主要貢獻者。政府發展風能產業的舉措和風電裝置容量的快速成長是有利於北美風力渦輪機複合材料市場激增的關鍵因素。風力發電是美國最大的再生能源,其發電量佔再生能源總量的近一半。德克薩斯州擁有其他州中最大的風力渦輪機容量。此外,風能是愛荷華州和堪薩斯州等州最普遍的發電來源。美國在 2020 年創下了歷史上最高的風力渦輪機裝置容量。
加拿大是生產和使用再生能源的主要國家之一。該國大力投資新能源儲存技術,以支持清潔能源發電活動。根據加拿大再生能源協會(CanREA)年終資料,2022年加拿大風能產業大幅成長。發電項目。此外,墨西哥的風能容量在過去十年中迅速增加。
據墨西哥能源合作夥伴有限責任公司稱,2021年該國風電累計裝置容量為8.3吉瓦,約佔該國總發電量的9%。因此,由於北美國家日益關注擴大裝置容量和投資新風電項目,對風力渦輪機複合材料的需求正在增加。
北美風力渦輪機複合材料市場收入及 2030 年預測(百萬美元)
北美風力渦輪機複合材料市場細分
北美風力渦輪機複合材料市場根據纖維類型、樹脂類型、技術、應用和國家進行細分。
依纖維類型,北美風力渦輪機複合材料市場分為碳纖維複合材料、玻璃纖維複合材料等。到2022年,玻璃纖維複合材料領域將佔據更大的佔有率。
從樹脂類型來看,北美風力渦輪機複合材料市場分為聚酯、環氧樹脂、聚氨酯、乙烯基酯等。 2022 年,環氧樹脂領域佔最大佔有率。
依技術分類,北美風力渦輪機複合材料市場分為樹脂灌注、預浸料、疊層等。 2022 年,樹脂灌注細分市場佔最大佔有率。
根據應用,北美風力渦輪機複合材料市場分為葉片和機艙。 2022 年,葉片細分市場將佔據更大佔有率。
依國家分類,北美風力渦輪機複合材料市場分為美國、加拿大和墨西哥。 2022年,美國將主導北美風力渦輪機複合材料市場。
Avient Corp、Toray Industries Inc、SGL Carbon SE、Owens Corning、Gurit Holding AG、Covestro AG、Hexion Inc、EPSILON Composite SA、Exel Composites Oyj 和 Hexcel Corp 是北美電力和控制電纜領域的一些領先公司市場。
The North America wind turbine composites market was valued at US$ 1,538.36 million in 2022 and is expected to reach US$ 3,507.65 million by 2030; it is estimated to record a CAGR of 10.9% from 2022 to 2030.
Increasing Length of Wind Turbine Blades Fuels North America Wind Turbine Composites Market
Wind turbine blades generate lift with the help of their curved shape. The rotor blades are designed in such a way that it generates the right amount of rotor blade lift and thrust, which creates optimum deceleration of the air and increases blade efficiency. Wind turbine blades are shaped to extract the maximum power from the wind at a low construction cost. Therefore, wind turbine blade manufacturers are always looking forward to manufacturing a more efficient blade design. Continuous improvements have been initiated in the design of wind blades to generate new wind turbine designs that are comparatively more compact, silent, and capable of producing more power from less wind. This includes increasing the length of blades to improve the efficiency.
The efficiency of the wind turbine is mainly dependent upon the aerodynamic shape and length of the blades, along with the materials used to produce the blades. Wind turbine blades are the most significant yet high-cost component in wind turbines. The use of composite material in blade applications depends upon the strength and stiffness offered by the material, along with low density. By improving the length of wind turbine blades, 7.5% more electricity can be produced in comparison to those smaller blades. Companies are continuously aiming towards the development of lightweight, cost-effective, and eco-friendly materials for the production of wind turbine blades. This factor is boosting the demand for advanced composite material in wind turbines, which is fueling the market growth.
North America Wind Turbine Composites Market Overview
The North America wind turbine composites market is segmented into the US, Canada, and Mexico. The US is a major contributor to market growth in this region. Government initiatives for developing the wind energy sector and a rapid upsurge in installed wind capacity are key factors favoring the proliferation of the wind turbine composites market in North America. Wind power is the largest renewable energy source in the US, which generates nearly half of the total renewable energy. Texas has the most wind turbine capacity among other states. Moreover, wind is the most prevalent source of electricity generation in states such as Iowa and Kansas. The US recorded the historically highest installation of wind turbine capacity in 2020. Moreover, it remained the largest market for new onshore additions, driven by the scheduled phase-out of the full-rate Production Tax Credit (PTC) in 2020.
Canada is one of the prime countries producing and using renewable power. The country invests heavily in new energy storage technologies to support clean energy generation activities. According to the Canadian Renewable Energy Association's (CanREA) year-end data, the wind energy sector in Canada grew significantly in 2022. The wind and solar industries in the country accounted for ~4,462 person-years of employment in 2022. Various onshore and offshore wind power projects are planned in the country for the next 10 years. Further, wind energy capacity has rapidly increased over the last decade in Mexico.
According to Mexico Energy Partners LLC., the country had a cumulative installed wind capacity of 8.3 GW in 2021, and it represents ~9% of the total electricity generation of the country. Thus, the demand for wind turbine composites is increasing due to the rising focus of North American countries on expanding installed capacities and investing in new wind projects.
North America Wind Turbine Composites Market Revenue and Forecast to 2030 (US$ Million)
North America Wind Turbine Composites Market Segmentation
The North America wind turbine composites market is segmented based on fiber type, resin type, technology, application, and country.
Based on fiber type, the North America wind turbine composites market is segmented into carbon fiber composites, glass fiber composites, and others. The glass fiber composites segment held a larger share in 2022.
In terms of resin type, the North America wind turbine composites market is categorized into polyester, epoxy, polyurethane, vinyl ester, and others. The epoxy segment held the largest share in 2022.
By technology, the North America wind turbine composites market is segmented into resin infusion, prepreg, lay up, and others. The resin infusion segment held the largest share in 2022.
Based on application, the North America wind turbine composites market is bifurcated into blades and nacelles. The blades segment held a larger share in 2022.
Based on country, the North America wind turbine composites market is segmented into the US, Canada, and Mexico. The US dominated the North America wind turbine composites market in 2022.
Avient Corp, Toray Industries Inc, SGL Carbon SE, Owens Corning, Gurit Holding AG, Covestro AG, Hexion Inc, EPSILON Composite SA, Exel Composites Oyj, and Hexcel Corp are some of the leading companies operating in the North America power and control cable market.