Product Code: SE 2505
The global industrial control & factory automation market was valued at USD 255.88 billion in 2024 and is projected to reach USD 399.12 billion by 2029; it is expected to register a CAGR of 9.3% during the forecast period. Increased adoption of IoT and AI in industrial environments is driving the industrial control & factory automation market. Whereas high initial capital investment is restraining the growth of the industrial control & factory automation market.
Scope of the Report |
Years Considered for the Study | 2020-2029 |
Base Year | 2023 |
Forecast Period | 2024-2029 |
Units Considered | Value (USD Billion) |
Segments | By Technology, Component, Solutions, Industry and Region |
Regions covered | North America, Europe, APAC, RoW |
"Cloud enterprise resource planning (ERP) segment is expected to hold the largest market share throughout the forecast period."
The ERP system integrates all these processes in one end-to-end system to streamline various business processes and information across the entire organization. Software as a Service (SaaS) ERP is enterprises' most popular deployment model. The rise of IIoT and connected factories has created a need for ERP systems that can integrate with sensors, machines, and control systems to collect real-time data from the production floor.
"Oil & Gas segment is likely to hold the largest market in 2024."
The oil and gas segment is estimated to account for the highest part of the industrial control and factory automation market in 2024. The oil and gas business is highly capital-intensive, therefore increasing operational efficiency is critical to profitability. Automation systems such as Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS), and Programmable Logic Controllers (PLCs) allow for real-time monitoring and control of operations, resulting in more efficient production processes, less waste, and higher throughput. Due to the specific emphasis on safety, efficiency, remote locations, data-driven decisions, and strict regulations followed in this sector has lead it to hold the largest market share. Predictive maintenance, automation, and robots are some of the critical smart technologies that help the industry lower costs, improve safety, and increase efficiency.
"The North America segment is likely to grow at the second highest CAGR during the forecast period."
North America's market is predicted to expand at the second-highest CAGR over the forecast period. North America's industrial control and factory automation market is being driven by technological breakthroughs such as Industry 4.0, IIoT, and Al, which improve operational efficiency and productivity. It is witnessing a massive thrust toward energy efficiency, sustainability, and strengent safety criteria, all of which continue to pressure the industries related to the automobile, oil, and gas sectors toward increased adoption of automation. And labor shortages take the advancement of automation even further along, fueled by strong government support and leadership from key players in the industry. Surging demand for industrial control & factory automation and warehouse automation is also shaping up the future of the industry.
Breakdown of primaries
The study contains insights from various industry experts, ranging from component suppliers to Tier 1 companies and OEMs. The break-up of the primaries is as follows:
- By Company Type - Tier 1 - 45%, Tier 2 - 35%, Tier 3 - 20%
- By Designation- C-level Executives - 50%, Directors - 30%, Others - 20%
- By Region-North America - 35%, Europe - 20%, Asia Pacific - 40%, RoW - 5%
The industrial control & factory automation market is dominated by a few globally established players such as ABB (Switzerland), Schneider Electric (France), Emerson Electric Co. (US), General Electric (US), Honeywell International Inc. (US), Siemens (Germany), Mitsubishi Electric Corporation (Japan), Rockwell Automation (US), Siemens (Germany), Stratasys (US), Omron Corporation (Japan), Yokogawa Electric Corporation (Japan), Endress+Hauser Group Services AG (Switzerland), FANUC Corporation (Japan). The study includes an in-depth competitive analysis of these key players in the industrial control & factory automation market, with their company profiles, recent developments, and key market strategies.
Research Coverage:
The report segments the industrial control & factory automation market and forecasts its size by component, industry, and region. The report also discusses the drivers, restraints, opportunities, and challenges pertaining to the market. It gives a detailed view of the market across four main regions-North America, Europe, Asia Pacific, and RoW. Supply chain analysis has been included in the report, along with the key players and their competitive analysis in the industrial control & factory automation ecosystem.
Key Benefits to Buy the Report:
- Analysis of key drivers (Increased adoption of IoT and AI in industrial environments, Government initiatives to boost industrial automation, Growing Focus on Operational Efficiency and Productivity, Growing demand for smart sensors in various industries to gain real-time insights, Increasing integration of machine vision systems with deep learning ), Restraint (Compelling initial capital investment and subsequent investment for maintenance, Components' incapacity to perform in a human-like manner, Security risks associated with cyber-physical systems), Opportunity (Increased demand for safety compliance automation solutions, Rising adoption of automation within the industrial sector, Rising need for augmented reality and virtual reality technologies), Challenges (Absence of standardization in industrial communication protocols and interfaces, Shortage of skilled workforce to operate industrial automation equipment and systems, Less precise systems due to differences between simulations and real life, Complexity in deployment of industrial control & factory automation solutions)
- Product Development/Innovation: Detailed insights on upcoming technologies, research and development activities, and new product launches in the industrial control & factory automation market.
- Market Development: Comprehensive information about lucrative markets - the report analyses the industrial control & factory automation market across varied regions
- Market Diversification: Exhaustive information about new products and services, untapped geographies, recent developments, and investments in the industrial control & factory automation market.
- Competitive Assessment: In-depth assessment of market shares, growth strategies, and service offerings of leading players ABB (Switzerland), Schneider Electric (France), Emerson Electric Co. (US), General Electric (US), Honeywell International Inc. (US), Siemens (Germany), Mitsubishi Electric Corporation (Japan), Rockwell Automation (US), among others in the industrial control & factory automation market.
TABLE OF CONTENTS
1 INTRODUCTION
- 1.1 STUDY OBJECTIVES
- 1.2 MARKET DEFINITION
- 1.3 STUDY SCOPE
- 1.3.1 MARKETS COVERED & REGIONAL SCOPE
- 1.3.2 INCLUSIONS AND EXCLUSIONS
- 1.3.3 YEARS CONSIDERED
- 1.4 CURRENCY CONSIDERED
- 1.5 LIMITATIONS
- 1.6 UNIT CONSIDERED
- 1.7 STAKEHOLDERS
- 1.8 SUMMARY OF CHANGES
2 RESEARCH METHODOLOGY
- 2.1 INTRODUCTION
- 2.1.1 SECONDARY DATA
- 2.1.1.1 List of major secondary sources
- 2.1.1.2 Key data from secondary sources
- 2.1.2 PRIMARY DATA
- 2.1.2.1 List of key interview participants
- 2.1.2.2 Breakdown of primaries
- 2.1.2.3 Key industry insights
- 2.1.2.4 Key data from primary sources
- 2.1.3 SECONDARY AND PRIMARY RESEARCH
- 2.2 MARKET SIZE ESTIMATION METHODOLOGY
- 2.2.1 BOTTOM-UP APPROACH
- 2.2.1.1 Approach to arrive at market size using bottom-up approach (demand side)
- 2.2.2 TOP-DOWN APPROACH
- 2.2.2.1 Approach to arrive at market size using top-down approach (supply side)
- 2.3 MARKET BREAKDOWN AND DATA TRIANGULATION
- 2.4 RESEARCH ASSUMPTIONS
- 2.5 LIMITATIONS AND RISK ASSESSMENT
3 EXECUTIVE SUMMARY
4 PREMIUM INSIGHTS
- 4.1 ATTRACTIVE GROWTH OPPORTUNITIES FOR PLAYERS IN INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET
- 4.2 INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET, BY COMPONENT
- 4.3 INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET, BY END-USE INDUSTRY
- 4.4 INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET, BY REGION
- 4.5 INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET, BY COUNTRY
5 MARKET OVERVIEW
- 5.1 INTRODUCTION
- 5.2 MARKET DYNAMICS
- 5.2.1 DRIVERS
- 5.2.1.1 Increased adoption of IoT and AI in industrial environments
- 5.2.1.2 Government initiatives to promote industrial automation
- 5.2.1.3 Growing focus on operational efficiency and productivity
- 5.2.1.4 Growing demand for smart sensors in various industries to gain real-time insights
- 5.2.1.5 Increasing integration of machine vision systems with deep learning
- 5.2.2 RESTRAINTS
- 5.2.2.1 Significant initial capital investment and subsequent maintenance expenses
- 5.2.2.2 Lack of quick adaptability to changing scenario and intuitive decision-making
- 5.2.2.3 Security risks associated with cyber-physical systems
- 5.2.3 OPPORTUNITIES
- 5.2.3.1 Increased demand for safety compliance automation solutions
- 5.2.3.2 Rising adoption of automation in industrial sector
- 5.2.3.3 Growing demand for augmented reality and virtual reality technologies
- 5.2.4 CHALLENGES
- 5.2.4.1 Absence of standardization in industrial communication protocols and interfaces
- 5.2.4.2 Shortage of skilled workforce to operate industrial automation equipment and systems
- 5.2.4.3 Lack of precision due to differences between simulations and real-life
- 5.2.4.4 Complexity in deployment of industrial control & factory automation solutions
- 5.3 VALUE CHAIN ANALYSIS
- 5.4 ECOSYSTEM ANALYSIS
- 5.5 INVESTMENT AND FUNDING SCENARIO
- 5.6 PRICING ANALYSIS
- 5.6.1 INDICATIVE PRICING OF KEY PLAYERS, BY ROBOT TYPE
- 5.6.2 AVERAGE SELLING PRICE TREND, BY TYPE
- 5.6.3 AVERAGE SELLING PRICE TREND, BY REGION
- 5.6.4 AVERAGE SELLING PRICE TREND OF INDUSTRIAL SENSORS
- 5.6.5 AVERAGE SELLING PRICES OF PROCESS ANALYZER, BY TYPE
- 5.7 TRENDS/DISRUPTIONS IMPACTING CUSTOMER BUSINESS
- 5.8 PORTER'S FIVE FORCES ANALYSIS
- 5.8.1 THREAT OF NEW ENTRANTS
- 5.8.2 THREAT OF SUBSTITUTES
- 5.8.3 BARGAINING POWER OF SUPPLIERS
- 5.8.4 BARGAINING POWER OF BUYERS
- 5.8.5 INTENSITY OF COMPETITIVE RIVALRY
- 5.9 KEY STAKEHOLDERS & BUYING CRITERIA
- 5.9.1 KEY STAKEHOLDERS IN BUYING PROCESS
- 5.9.2 BUYING CRITERIA
- 5.10 CASE STUDY
- 5.10.1 WORLD WIDE FITTINGS, INC. ADOPTS MITSUBISHI ELECTRIC'S INDUSTRIAL ROBOTICS TO STREAMLINE OPERATIONS
- 5.10.2 BOMBARDIER TRANSPORTATION SELECTS ABB TO PROVIDE SCADA SYSTEM FOR BANGKOK'S MONORAIL PROJECT
- 5.10.3 COOPER TIRE ADOPTS ROCKWELL AUTOMATION'S MES SOLUTION FOR GREATER EFFICIENCY
- 5.10.4 ENEL GREEN POWER S.P.A. IMPLEMENTS ABB ABILITY FOR PREDICTIVE MAINTENANCE IN HYDROPOWER PLANTS
- 5.10.5 CHINA NATIONAL BUILDING MATERIAL GROUP CORPORATION ENHANCES ENERGY EFFICIENCY WITH SCHNEIDER ELECTRIC'S ECOSTRUXURE
- 5.10.6 ARKEMA GROUP UPGRADES SYSTEMS WITH ABB'S SYSTEM 800XA ARCHITECTURE
- 5.11 TECHNOLOGY ANALYSIS
- 5.11.1 KEY TECHNOLOGIES
- 5.11.1.1 Artificial intelligence
- 5.11.1.2 Augmented reality
- 5.11.1.3 Blockchain
- 5.11.1.4 5G
- 5.11.1.5 Digital twin
- 5.11.1.6 IoT
- 5.11.2 COMPLEMENTARY TECHNOLOGIES
- 5.11.2.1 Smart energy management
- 5.11.2.2 Cybersecurity
- 5.11.3 ADJACENT TECHNOLOGIES
- 5.12 TRADE ANALYSIS
- 5.13 PATENTS ANALYSIS
- 5.14 KEY CONFERENCES & EVENTS, 2024-2026
- 5.15 DIGITALIZATION IN INDUSTRIAL CONTROL
- 5.16 REGULATORY LANDSCAPE
- 5.16.1 REGULATORY BODIES, GOVERNMENT AGENCIES, AND OTHER ORGANIZATIONS
- 5.16.2 STANDARDS AND REGULATIONS RELATED TO INDUSTRIAL ROBOTICS
- 5.17 IMPACT OF AI ON INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET
- 5.17.1 INTRODUCTION
- 5.17.2 AI USE CASES
6 INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET, BY COMPONENT
- 6.1 INTRODUCTION
- 6.2 INDUSTRIAL CONTROL SYSTEMS
- 6.2.1 SUPERVISORY CONTROL AND DATA ACQUISITION (SCADA)
- 6.2.2 DISTRIBUTED CONTROL SYSTEM (DCS)
- 6.2.2.1 Software
- 6.2.2.1.1 Analyze data and help identify precise locations for repair
- 6.2.2.2 Hardware
- 6.2.2.2.1 Increase in industrial automation projects to drive market growth
- 6.2.2.3 Services
- 6.2.2.3.1 Need for plant optimization across industries driving services segment
- 6.2.3 PROGRAMMABLE LOGIC CONTROLLER (PLC)
- 6.2.4 INDUSTRIAL PC
- 6.2.4.1 Panel IPC
- 6.2.4.1.1 Growing adoption of automated manufacturing technologies to drive market
- 6.2.4.2 Rack mount IPC
- 6.2.4.2.1 Rising need for compact designs in space-constrained applications to increase demand
- 6.2.4.3 DIN rail IPC
- 6.2.4.3.1 Need for maintenance-free and continuous operations fueling use of rugged and scalable DIN rail IPCs
- 6.2.4.4 Embedded IPC
- 6.2.4.4.1 Rising use of embedded IPCs in high-bandwidth projects
- 6.2.5 HUMAN MACHINE INTERFACE
- 6.2.5.1 Hardware
- 6.2.5.2 Software
- 6.3 INDUSTRIAL SOFTWARE
- 6.3.1 MANUFACTURING EXECUTION SYSTEM (MES)
- 6.3.1.1 Software
- 6.3.1.1.1 Reduction in manufacturing cycle time and low data maintenance requirements to boost demand
- 6.3.1.2 Services
- 6.3.1.2.1 Need for routine power supply checks in manufacturing plants to contribute to segmental growth
- 6.3.1.3 Implementation
- 6.3.2 SOFTWARE UPGRADE
- 6.3.2.1 Training
- 6.3.2.2 Maintenance
- 6.3.3 PLANT ASSET MANAGEMENT (PAM)
- 6.3.3.1 On-premises (Offline) deployment
- 6.3.3.2 Cloud-based (Online) deployment
- 6.3.4 WAREHOUSE MANAGEMENT SYSTEM (WMS)
- 6.3.4.1 On-premises
- 6.3.4.1.1 Rising demand for customized warehouse solutions to fit specific needs and workflows to drive growth
- 6.3.4.2 Cloud-based
- 6.3.4.2.1 Increased processing speed and reduced upfront costs to accelerate demand
- 6.3.5 MANUFACTURING OPERATION MANAGEMENT (MOM)
- 6.3.6 CLOUD ENTERPRISE RESOURCE PLANNING (ERP)
- 6.3.7 QUALITY MANAGEMENT SYSTEM (QMS)
- 6.4 CNC CONTROLLER
- 6.4.1 HARDWARE
- 6.4.1.1 Hardware plays crucial role in overall CNC controller systems
- 6.4.2 SOFTWARE & SERVICES
- 6.4.2.1 Upgraded software solutions and additional services enhance manufacturing efficiency and accuracy
- 6.4.2.1.1 Installation and commissioning
- 6.4.2.1.2 Retrofitting and reconditioning
- 6.5 INDUSTRIAL ROBOTICS
- 6.5.1 INDUSTRIAL ROBOTS
- 6.5.1.1 Traditional robots
- 6.5.1.1.1 Widely used to handle heavy loads and programmed to perform single task repeatedly
- 6.5.1.2 Collaborative robots
- 6.5.1.2.1 Ease of use and low-cost deployment to drive market
- 6.5.2 ROBOT END EFFECTOR
- 6.6 INDUSTRIAL 3D PRINTING
- 6.7 PROCESS ANALYZER
- 6.7.1 GAS ANALYZER
- 6.7.1.1 Oxygen analyzer
- 6.7.1.1.1 Advancements in sensor technology to fuel market growth
- 6.7.1.2 Carbon dioxide analyzer
- 6.7.1.2.1 Need for accurate monitoring of CO2 levels to drive market
- 6.7.1.3 Moisture analyzer
- 6.7.1.3.1 Growing importance of moisture control in industries to foster growth
- 6.7.1.4 Toxic gas analyzer
- 6.7.1.4.1 Advanced sensor technology and integration of IoT to create lucrative growth opportunities
- 6.7.1.5 Hydrogen sulfide analyzer
- 6.7.1.5.1 Increasing focus on reducing environmental impact to boost segmental growth
- 6.7.2 LIQUID ANALYZER
- 6.7.2.1 PH/ORP analyzer
- 6.7.2.1.1 Demand in reverse osmosis and cooling processes to fuel segmental growth
- 6.7.2.2 Conductivity analyzer
- 6.7.2.2.1 Demand in pharmaceutical sector to improve process efficiency to propel market
- 6.7.2.3 Turbidity analyzer
- 6.7.2.3.1 Need for accurate turbidity measurement in wastewater treatment facilities to accelerate growth
- 6.7.2.4 Dissolved oxygen analyzer
- 6.7.2.4.1 Adoption in water monitoring applications to contribute to market growth
- 6.7.2.5 Liquid density analyzer
- 6.7.2.5.1 Deployment of IoT technology in liquid density analyzers to propel growth
- 6.7.2.6 MLSS analyzer
- 6.7.2.6.1 MLSS analyzers widely used to optimize wastewater treatment
- 6.7.2.7 TOC analyzer
- 6.7.2.7.1 Adoption of TOC analyzers to ensure compliance with pharmaceutical manufacturing standards to boost growth
- 6.8 FIELD INSTRUMENTATION
- 6.8.1 LEVEL TRANSMITTER
- 6.8.1.1 Growing application in petrochemicals and water & wastewater treatment industries to drive demand
- 6.8.2 PRESSURE TRANSMITTER
- 6.8.2.1 Rising oil & gas exploration activities to drive market
- 6.8.3 TEMPERATURE TRANSMITTER
- 6.8.3.1 Increasing use in pharmaceutical manufacturing to boost demand
- 6.8.4 OTHER TRANSMITTERS
- 6.8.4.1 Growing use of vibration-level switches as overfill protection devices to boost market growth
- 6.9 FLOW METER
- 6.9.1 MAGNETIC
- 6.9.1.1 Increasing demand for clean water and wastewater treatment to drive market
- 6.9.2 CORIOLIS
- 6.9.2.1 Broad range of applications in various industries to drive market
- 6.9.3 ULTRASONIC
- 6.9.3.1 Growing need for efficient water and energy management to drive market
- 6.9.4 ULTRASONIC FLOW METERS, BY TECHNOLOGY
- 6.9.4.1 Transit time
- 6.9.4.2 Doppler
- 6.9.5 DIFFERENTIAL PRESSURE
- 6.9.5.1 High reliability and accuracy of differential pressure to drive market
- 6.9.5.2 Orifices
- 6.9.5.3 Venturi tubes
- 6.9.5.4 Cone meters
- 6.9.5.5 Flow nozzles
- 6.9.5.6 Variable area meters
- 6.9.5.7 Averaging pitots
- 6.9.5.8 Dall tubes
- 6.9.6 POSITIVE DISPLACEMENT
- 6.9.6.1 Demand for cost-effective flow meters in applications requiring high accuracy to drive growth
- 6.9.6.2 Piston flow meters
- 6.9.6.3 Oscillating piston meters
- 6.9.6.4 Helical flow meters
- 6.9.6.5 Bi-rotors
- 6.9.6.6 Rotary vane meters
- 6.9.6.7 Gear flow meters
- 6.9.7 TURBINE
- 6.9.7.1 Industrial automation and process optimization to drive market
- 6.9.8 VORTEX
- 6.9.8.1 Low initial setup cost to drive market
- 6.9.9 OTHERS
- 6.9.9.1 Thermal flow meters
- 6.9.9.2 Multiphase flow meters
- 6.10 INDUSTRIAL COMMUNICATION
- 6.10.1 COMPONENTS
- 6.10.1.1 Switches
- 6.10.1.1.1 Offers high security and durability for reliable network connections between interconnected computers
- 6.10.1.2 Gateways
- 6.10.1.2.1 Market players introducing innovative gateways to support Industry 4.0 and smart factory applications
- 6.10.1.3 Routers & WAP
- 6.10.1.3.1 Compatibility with 5G technology in routers supports seamless industrial communications
- 6.10.1.4 Controllers & connectors
- 6.10.1.4.1 Controllers & connectors critical for determining priorities of tasks and interruptions
- 6.10.1.5 Communication interfaces & converters
- 6.10.1.5.1 Enables communication between dissimilar media types
- 6.10.1.6 Power supply devices
- 6.10.1.6.1 High-performance integrated PMICS useful in communications power management
- 6.10.1.7 Others
- 6.10.2 SOFTWARE
- 6.10.2.1 Networking management software optimizes network efficiency and minimizes total cost of ownership
- 6.10.3 SERVICES
- 6.10.3.1 Industrial communications services support integration of devices, machines, and systems within IIoT ecosystem
- 6.11 INDUSTRIAL MONITORING & SAFETY
- 6.11.1 INDUSTRIAL SENSOR
- 6.11.1.1 Contact sensors
- 6.11.1.1.1 Growing demand in oil & gas and energy & power industries to fuel growth
- 6.11.1.2 Non-contact sensors
- 6.11.1.2.1 Food & beverages and mining sectors to generate significant demand
- 6.11.2 MACHINE CONDITION MONITORING
- 6.11.2.1 Online
- 6.11.2.1.1 Need for real-time data regarding variations in machine performance for prompt decision-making to drive market
- 6.11.2.2 Portable 180 6.11.2.2.1 Cost-effectiveness and maximized production output to boost demand
- 6.11.3 MACHINE SAFETY
- 6.11.3.1 Systems
- 6.11.3.1.1 Compliance with stringent safety standards to drive growth
- 6.11.3.2 Sensors
- 6.11.3.2.1 Adoption of technologies such as machine learning to drive growth
- 6.11.4 SOLID STATE RELAY
- 6.11.5 MACHINE VISION SYSTEM
- 6.11.5.1 PC-based machine vision system
- 6.11.5.1.1 High processing power and versatility with diverse applications and cameras to drive demand
- 6.11.5.2 Smart camera-based machine vision system
- 6.11.5.2.1 Growing use in imaging and security applications to drive market
- 6.11.6 PREDICTIVE MAINTENANCE
- 6.11.6.1 Hardware
- 6.11.6.2 Solutions
7 INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET, BY END-USE INDUSTRY
- 7.1 INTRODUCTION
- 7.2 OIL & GAS
- 7.2.1 ADOPTION OF ASSET MONITORING SOLUTIONS DRIVING MARKET GROWTH
- 7.3 CHEMICALS
- 7.3.1 ADOPTION OF AUTOMATED SOLUTIONS TO MAINTAIN IDEAL INVENTORY LEVELS TO CONTRIBUTE TO MARKET GROWTH
- 7.4 PULP & PAPER
- 7.4.1 USE OF AUTOMATION TO CUT COSTS AND INCREASE OUTPUT FUELING MARKET GROWTH
- 7.5 PHARMACEUTICAL
- 7.5.1 GROWING NEED TO STANDARDIZE MANUFACTURING PROCESSES TO SUPPORT MARKET GROWTH
- 7.6 METALS & MINING
- 7.6.1 ADOPTION OF ADVANCED TECHNOLOGIES TO ENHANCE METAL PRODUCTION FUELING GROWTH
- 7.7 FOOD & BEVERAGES
- 7.7.1 NEED FOR HIGHER PRODUCTIVITY AND MINIMIZED DOWNTIME TO DRIVE MARKET GROWTH
- 7.8 ENERGY & POWER
- 7.8.1 ADOPTION OF SMART AUTOMATION TOOLS TO FACILITATE EFFICIENT ENERGY & POWER MANAGEMENT TO PROPEL MARKET
- 7.9 AUTOMOTIVE
- 7.9.1 AUTOMOTIVE INDUSTRY WITNESSING INCREASING DEMAND FOR INDUSTRY CONTROL & FACTORY AUTOMATION TO BOOST PRODUCTIVITY AND SAFETY
- 7.10 AEROSPACE
- 7.10.1 MANUFACTURERS ADOPTING AUTOMATION TECHNOLOGY TO MEET HIGH PRODUCTION TARGETS
- 7.11 SEMICONDUCTOR & ELECTRONICS
- 7.11.1 INCREASING NEED TO ENHANCE SEMICONDUCTOR AND ELECTRONICS SUPPLY CHAIN TO DRIVE SEGMENT GROWTH
- 7.12 HEAVY MACHINERY
- 7.12.1 DEPENDENCE ON AI TO ASSESS MACHINE CONDITIONS AND MINIMIZE DOWNTIME ACCELERATING MARKET GROWTH
- 7.13 MEDICAL DEVICES
- 7.13.1 UTILIZATION OF ROBOTS IN MEDICAL FACILITIES TO MAINTAIN INFECTION-FREE ENVIRONMENT TO DRIVE GROWTH
- 7.14 OTHER END-USE INDUSTRIES
8 INDUSTRIAL CONTROL & FACTORY AUTOMATION MARKET, BY REGION
- 8.1 INTRODUCTION
- 8.2 NORTH AMERICA
- 8.2.1 MACROECONOMIC OUTLOOK FOR NORTH AMERICA
- 8.2.2 US
- 8.2.2.1 Push for industrial automation excellence redefining efficiency and productivity across industries
- 8.2.3 CANADA
- 8.2.3.1 Adoption of advanced automation technologies empowering key manufacturing sectors
- 8.2.4 MEXICO
- 8.2.4.1 Growth in manufacturing sector driving demand for industrial automation and smart technologies
- 8.3 EUROPE
- 8.3.1 MACROECONOMIC OUTLOOK FOR EUROPE
- 8.3.2 UK
- 8.3.2.1 Government support for development of IoT technologies to drive market
- 8.3.3 GERMANY
- 8.3.3.1 Growing use of industrial robots in automotive sector fueling market growth
- 8.3.4 FRANCE
- 8.3.4.1 Increasing government initiatives to promote industrial automation to support market growth
- 8.3.5 REST OF EUROPE
- 8.4 ASIA PACIFIC
- 8.4.1 MACROECONOMIC OUTLOOK FOR ASIA PACIFIC
- 8.4.2 CHINA
- 8.4.2.1 Rising wages in manufacturing industries boosting demand for automation
- 8.4.3 JAPAN
- 8.4.3.1 Strong focus on advancing industrial automation to support market growth
- 8.4.4 INDIA
- 8.4.4.1 Growing government initiatives for automation of industries to fuel growth
- 8.4.5 REST OF ASIA PACIFIC
- 8.5 REST OF THE WORLD (ROW)
- 8.5.1 MACROECONOMIC OUTLOOK FOR REST OF THE WORLD
- 8.5.2 MIDDLE EAST & AFRICA
- 8.5.2.1 GCC
- 8.5.2.1.1 Economy witnessing rapid transformation with adoption of smart manufacturing technologies
- 8.5.2.2 Africa & Rest of Middle East
- 8.5.2.2.1 Growth of manufacturing, electronics, medical devices, and automotive sectors to drive market
- 8.5.3 SOUTH AMERICA
- 8.5.3.1 Brazil
- 8.5.3.1.1 Government initiatives encouraging adoption of advanced solutions to fuel market growth
- 8.5.3.2 Rest of South America
9 COMPETITIVE LANDSCAPE
- 9.1 OVERVIEW
- 9.2 KEY PLAYER STRATEGIES/RIGHT TO WIN, 2022-2024
- 9.3 MARKET SHARE ANALYSIS, 2023 (INDUSTRIAL ROBOTICS)
- 9.4 REVENUE ANALYSIS, 2019-2023
- 9.5 MARKET SHARE ANALYSIS, 2023 (INDUSTRIAL SENSORS)
- 9.6 MARKET SHARE ANALYSIS, 2023 (PROCESS ANALYZER)
- 9.7 COMPANY VALUATION AND FINANCIAL METRICS
- 9.8 BRAND/PRODUCT COMPARISON
- 9.9 COMPANY EVALUATION MATRIX: KEY PLAYERS, 2023
- 9.9.1 STARS
- 9.9.2 EMERGING LEADERS
- 9.9.3 PERVASIVE PLAYERS
- 9.9.4 PARTICIPANTS
- 9.9.5 COMPANY FOOTPRINT: KEY PLAYERS, 2023
- 9.9.5.1 Company footprint
- 9.9.5.2 Region footprint
- 9.9.5.3 Payload footprint
- 9.9.5.4 Robot type footprint
- 9.9.5.5 End-use industry footprint
- 9.10 COMPANY EVALUATION MATRIX: STARTUPS/SMES, 2023
- 9.10.1 PROGRESSIVE COMPANIES
- 9.10.2 RESPONSIVE COMPANIES
- 9.10.3 DYNAMIC COMPANIES
- 9.10.4 STARTING BLOCKS
- 9.10.5 COMPETITIVE BENCHMARKING: STARTUPS/SMES, 2023
- 9.10.5.1 Detailed list of key startups/SMEs
- 9.10.5.2 Competitive benchmarking of key startups/SMEs
- 9.11 COMPETITIVE SCENARIO AND TRENDS
- 9.11.1 PRODUCT LAUNCHES
- 9.11.2 DEALS
- 9.11.3 EXPANSIONS
10 COMPANY PROFILES
- 10.1 KEY PLAYERS
- 10.1.1 SCHNEIDER ELECTRIC
- 10.1.1.1 Business overview
- 10.1.1.2 Products/Solutions/Services offered
- 10.1.1.3 Recent developments
- 10.1.1.3.1 Product launches
- 10.1.1.3.2 Deals
- 10.1.1.3.3 Expansions
- 10.1.1.4 MnM view
- 10.1.1.4.1 Key strengths/Right to win
- 10.1.1.4.2 Strategic choices
- 10.1.1.4.3 Weaknesses and competitive threats
- 10.1.2 HONEYWELL INTERNATIONAL INC.
- 10.1.2.1 Business overview
- 10.1.2.2 Products/Solutions/Services offered
- 10.1.2.3 Recent developments
- 10.1.2.3.1 Product launches
- 10.1.2.3.2 Deals
- 10.1.2.4 MnM view
- 10.1.2.4.1 Right to win
- 10.1.2.4.2 Strategic choices
- 10.1.2.4.3 Weaknesses and competitive threats
- 10.1.3 ABB
- 10.1.3.1 Business overview
- 10.1.3.2 Products/Solutions/Services offered
- 10.1.3.3 Recent developments
- 10.1.3.3.1 Product launches
- 10.1.3.3.2 Deals
- 10.1.3.4 MnM view
- 10.1.3.4.1 Key strengths/Right to win
- 10.1.3.4.2 Strategic choices
- 10.1.3.4.3 Weaknesses and competitive threats
- 10.1.4 ROCKWELL AUTOMATION
- 10.1.4.1 Business overview
- 10.1.4.2 Recent developments
- 10.1.4.2.1 Product launches
- 10.1.4.2.2 Deals
- 10.1.4.3 MnM view
- 10.1.4.3.1 Key strengths/Right to win
- 10.1.4.3.2 Strategic choices
- 10.1.4.3.3 Weaknesses and competitive threats
- 10.1.5 SIEMENS
- 10.1.5.1 Business overview
- 10.1.5.2 Products/Solutions/Services offered
- 10.1.5.3 Recent developments
- 10.1.5.3.1 Product Launches
- 10.1.5.3.2 Deals
- 10.1.5.4 MnM view
- 10.1.5.4.1 Key strengths/Right to win
- 10.1.5.4.2 Strategic choices
- 10.1.5.4.3 Weaknesses and competitive threats
- 10.1.6 EMERSON ELECTRIC CO.
- 10.1.6.1 Business overview
- 10.1.6.2 Products/Solutions/Services offered
- 10.1.6.3 Recent developments
- 10.1.6.3.1 Product launches
- 10.1.6.3.2 Deals
- 10.1.6.4 MnM view
- 10.1.6.4.1 Key strengths/Right to win
- 10.1.6.4.2 Strategic choices
- 10.1.6.4.3 Weaknesses and competitive threats
- 10.1.7 MITSUBISHI ELECTRIC CORPORATION
- 10.1.7.1 Business overview
- 10.1.7.2 Products/Solutions/Services offered
- 10.1.7.3 Recent developments
- 10.1.7.3.1 Product launches
- 10.1.7.3.2 Deals
- 10.1.7.3.3 Expansions
- 10.1.8 GENERAL ELECTRIC COMPANY
- 10.1.8.1 Business overview
- 10.1.8.2 Products/Solutions/Services offered
- 10.1.8.3 Recent developments
- 10.1.8.3.1 Product launches
- 10.1.8.3.2 Deals
- 10.1.8.3.3 Expansions
- 10.1.9 YOKOGAWA ELECTRIC CORPORATION
- 10.1.9.1 Business overview
- 10.1.9.2 Products/Solutions/Services offered
- 10.1.9.3 Recent developments
- 10.1.9.3.1 Product launches
- 10.1.9.3.2 Deals
- 10.1.9.4 MnM view
- 10.1.9.4.1 Key strengths/Right to win
- 10.1.9.4.2 Strategic choices
- 10.1.9.4.3 Weaknesses and competitive threats
- 10.1.10 OMRON CORPORATION
- 10.1.10.1 Business overview
- 10.1.10.2 Products/Solutions/Services offered
- 10.1.10.3 Recent developments
- 10.1.10.3.1 Product launches
- 10.1.10.3.2 Deals
- 10.1.11 ENDRESS+HAUSER GROUP SERVICES AG
- 10.1.11.1 Business overview
- 10.1.11.2 Products/Solutions/Services offered
- 10.1.11.3 Recent developments
- 10.1.11.3.1 Product launches
- 10.1.11.3.2 Expansions
- 10.1.12 FANUC CORPORATION
- 10.1.12.1 Business overview
- 10.1.12.2 Products/Solutions/Services offered
- 10.1.12.3 Recent developments
- 10.1.12.3.1 Product launches
- 10.1.12.3.2 Expansions
- 10.2 OTHER KEY PLAYERS
- 10.2.1 WIKA ALEXANDER WIEGAND SE & CO. KG
- 10.2.2 DWYWER INSTRUMENTS, LLC
- 10.2.3 STRATASYS
- 10.2.4 3D SYSTEMS
- 10.2.5 FUJI ELECTRIC CO., LTD.
- 10.2.6 HITACHI LTD.
- 10.2.7 KROHNE
- 10.2.8 AZBIL CORPORATION
- 10.2.9 VEGA
- 10.2.10 TRIDITIVE
- 10.2.11 ULTIMAKER
- 10.2.12 ROBOZE
- 10.2.13 SOFTGRIPPING
- 10.2.14 ZIVID
- 10.2.15 TEGAN INNOVATIONS
- 10.2.16 NANO DIMENSION
- 10.2.17 ONROBOT A/S
- 10.2.18 INXPECT S.P.A
11 APPENDIX
- 11.1 INSIGHTS OF INDUSTRY EXPERTS
- 11.2 DISCUSSION GUIDE
- 11.3 KNOWLEDGESTORE: MARKETSANDMARKETS' SUBSCRIPTION PORTAL
- 11.4 CUSTOMIZATION OPTIONS
- 11.5 RELATED REPORTS
- 11.6 AUTHOR DETAILS